A decision for the future: The Metabo battery pack system
The correct choice of the battery pack system is a decision with long-term effect. The battery pack systems of different manufacturers are not compatible with each other. and who does not want to carry around an entire collection of battery packs and chargers, should rather decide for a uniform battery pack system right from the beginning. Therefore, so many professionals with high and very high demands for their tools trust in Metabo. We produce any relevant power tool, where it is technically sensible and feasible, also as cordless variant - powerful, innovative and in top quality.
Our vision - your ultimate independence thanks to innovative battery pack system
As leader in battery pack technology, Metabo consequently follows the vision of a cordless construction site to make you even more independent and mobile in your work. When deciding for our cordless interface, you are ideally equipped for the challenges of the future. With our innovations we are continuously setting new standards in the battery pack area. This translates for you into maximum freedom when drilling, screwdriving, chiselling, sawing, grinding and cutting.
They ensure limitless compatibility: The Metabo cordless systems
With our 100% compatibility within the battery pack system, you are always on the safe side - today and in the future! Since 2009, all Metabo battery packs, machines and chargers in a volt class can be flexibly combined with each other. This is possible by our powerful Metabo Ultra-M technology. It stands for the optimal coordination and perfect communication between machine, battery pack and charger. Like this, battery packs are charged in an efficient and gentle manner and are quickly ready to be used again thanks to patented AIR COOLED technology. When working, the energy is optimally used. At the same time our battery packs are particularly durable: A fully charged 5.2 Ampere hour battery pack serves more than an entire working day for many applications.
Light and versatile: The 10.8 Volt class from Metabo
Performance and endurance in a compact housing: With our light and compact 10.8 Volt machines you are ready to go and perfectly equipped even for working at hard to reach spots. To get high productivity and the maximum performance from the particularly compact machines, we focus on our decades of battery pack competence and our powerful Ultra-M technology even in the 10.8 Volt class. Our 10.8 Volt machines are equipped with Li-Ion battery packs, robust full metal gears and powerful motors - and thus render the required power even in tight conditions. From the cordless screwdriver and the cordless impact wrench to the cordless cartridge gun, the mobile sabre saw or the practical cordless inspection lamps and portable lamps: In relation to their size, our 10.8 Volt solutions do not only deliver excellent performance, but also impressive endurance. We offer all 10.8 Volt battery packs with a capacity of 2.0, 4.0 or particularly 5.2 Ampere hours. With Pick+Mix you can individually choose your personal set from battery packs, mobile power tools, chargers and transport solutions of the 10.8 Volt class.
Three year warranty on our battery packs
Our Ultra-M technology guarantees efficient and gentle charging, optimal energy use and extremely long service life of the battery pack. We grant a three year warranty on all our lithium-ion battery packs.
The 12 V Cordless Class from Metabo - light, compact and powerful
The new 12 Volt cordless machines from Metabo make your daily work easier in the real sense of the word. The devices are particularly light and fit perfectly ergonomical in your hand. They are of a small and compact design, however they deliver full power. The small power packs have a slim handle for optimum handling when being used. Thanks to the low weight even longer working or working overhead is no problem. The particularly short design of the housing is ideal when working in tight spaces. Also the 12 Volt slide-on battery pack is particularly compact and underlines the handy design of the Metabo 12 Volt class.
The new 12 V cordless tools at a glance
All 12 Volt cordless machines can easily be recognised by the 12 in their name. There are four drills/screwdrivers models available in the 12 Volt class. The simplest model is the BS 12, which is a typical representative of the 12 V class with exactly one kilo of weight and a hard torque of 40 Newton meters. It fits well into the hand and is powerful in its use. Even more compact and also more powerful is the 12 Volt drill/screwdriver BS 12 BL with a brushless motor for highest efficiency with very compact design. Both models are also available with a quick system for fast tool holder replacement and accessory replacement for flexible working.
Metabo offers two models with 12 Volt for the cordless hammer drills. The cordless hammer drill SB 12 and the brushless SB 12 BL. This also applies to the cordless impact drivers SSD 12 and the brushless SSD 12 BL, both with a hexagon recess to receive screwdriver bits. Two 12 Volt cordless caulking guns with different pipe lengths and a discharge pressure of 4400 N are also part of Metabo's range. The 12 Volt class is rounded off with a cordless portable lamp and a power adapter, a compact multi-function adapter that can be used as desktop charger, energy source and lamp.
LiHD 12 V: Cut the cord – keep the power.
The energy for the 12 Volt cordless machines orginates from the compact 12 Volt battery packs. These are available both as Li-Power battery packs with a capacity of 2 Ampere hours and as LiHD high-performance battery pack with a total of 4 Ampere hours. Like this the poweful LiHD technology from Metabo is available also with 12 Volt: High-performance cells deliver enough power to perform demanding applications without cable. Maximum performance that is available for an extremely long time - for any application. Day after day.
One charger - one system
In the future, all chargers can charge both 18 Volt and 12 Volt slide-in battery packs. This permits the parallel use of 18 Volt and 12 Volt machines without any problems. One charger for all Metabo slide-in battery packs - charging made simple. One system from Metabo for your cordless future.
Maximum freedom, full compatibility: The 18 Volt classes from Metabo
With our powerful 18 Volt machines you work in a quick and powerful manner even for demanding applications. We offer you the right tool for every applications by virtue of our particularly extensive range: From cordless screwdrivers and impact drills with highes torque, brushless motors and high-performance impact mechanism to the widest range of cordless tools for processing stainless steel on the market, perfectly matched to uit your applications.
Flexible and sustainable: The 18 Volt cordless class
With our flexible Pick+Mix system you select from numerous machines, battery packs, chargers, accessories, cases and bags just the components you need for your work - so you have the right cordless solution at hand for any application. This also applies to the future, since all Metabo cordless systems of the same volt class can be combined with each other. For example, the first battery packs, machines and chargers of the current generation from the year 2009 are today and in the future compatible with all new Metabo developments. All 18 volt battery packs are offered with a capacity of 2.0, 4.0 or particularly enduring 5.2 Ampere hours.
With our Metabo Ultra-M technology we have the most powerful, and, focusing on the service life, the world's best lithium-ion battery management system: A multi-functional monitoring system continuously monitors both the battery pack temperature and the amperage. The electronic single cell protection also ensures a long service life of the battery pack. Therefore, we can grant a three year warranty on our battery packs with a clear conscience.
For endless power: The 36 volt class from Metabo
Craftsmen would like to do without cables, not without performance - this applies also for extreme applications. Metabo offers you therefore powerful tools with 36 volt battery pack technology for demanding applications far away from any power supply. The robust 36 volt battery packs with lithium-ion technology deliver the required concentrated energy for demanding applications in trade and industry. The tools are in no way inferior to their mains-powered counterparts.
The 36 volt class: Powerful and durable
Only who sees the components of a cordless tool as one unit and relies on the right charging technology with intelligent monitoring functions, can fulfil the requirements professional users have for a 36 volt cordless tool. In our Metabo Ultra-M technology, the tool, battery pack and charger are perfectly synchronised - for more efficient and gentler charging and optimum utilisation of energy.
Our patented AIR COOLED charging technology ensures short charging times and a long service life of the battery pack. The battery packs impress with an electronic single cell protection, intelligent battery management and a high number of charging cycles. Since the battery packs hardly discharge by themselves, they are always ready for use. Lithium ion battery packs with 36 volt are under particular stress during work- however, thanks to our sophisticated battery pack technology, we can offer you a three year warranty with a clear conscience.
Permits unlimited freedom during use: The cordless tools from Metabo
Cordless tools from Metabo rank among the best in the world. We know that mainly power and flexibilty count for professionals on the construction site and in the workshop. Our wide range of cordless tools from 10.8 to 36 volt offers more than enough of both.
Quality from the technology leader in terms of cordless tools
Already in the 80s, Metabo was one of the world's first manufacturers to offer a wide range of cordless tools. We have continued to expand this top position in the past decades. Therefore we introduce any new power tool, for which it is technically feasible, also as cordless variant to the market. In this process we often explore new directions and have developed for example the first battery-powered magnetic core drill in the world, and we are the only manufacturer to offer a complete range of cordless tools for processing stainless steel. The world's first battery packs with a capacity of 4.0 Ampere hours are also a brainchild of Metabo - just like the world's first 5.2 Ah battery packs, which we introduced shortly after. By virtue of these technological leaps we have opened completely new dimensions for cordless power tools.
Our vision is the cordless construction site. Our way to get there is our sophisticated Ultra-M technology with its optimal coordination and perfect communication between machine, battery pack and charger. We continuously work to enlarge and improve our range. No matter if you take battery-powered drills/screwdrivers, angle grinders, circular saws or band files from us - who builds with Metabo, builds in the future, for our battery packs will still fit tomorrow for all Metabo machines and chargers of their volt class.
The cordless tools are flexible and powerful thanks to Ultra-M technology.
With Metabo, professionals worldwide declare war to the cable and the limited range of action on construction sites and in workshops. Use the freedom our cordless tools offer.
Our product portfolio shows that we do not make any compromises here. We have the right machine for every application and set new standards in terms of performance, robustness and safety. We underpin the Metabo quality commitment with a battery pack warranty of three years, no matter how often you charge the battery pack.
From easy to handle to ultra-powerful - Metabo drills/screwdrivers for any application
Would you like to drill and drive in scews without cable and independently from the power grid? No problem. Cordless screwdrivers from Metabo are available with a battery pack voltage from 10.8 Volt to 18 Volt. The small, light 10.8 Volt cordless screwdriver Power Maxx BS with an extremely short overall length is ideally suited for drilling and screwdriving with smaller diameters. For more power use our 18 Volt two-speed screwdriver. They are divided into 3 performance classes: L, LT and LTX. The LTX drills/screwdrivers are designed for very demanding, hard applications. The widest range of applications is offerd by the brushless 3-speed power packs BS 18 LTX-3 BL I and BS 18 LTX-3 BL Q I with quick system. They have an extremely wide speed range and a high torque of 120 Nm for powerful screwdriving performance and versatile drilling in metal and wood.
Intelligent details when drilling and screwdriving
Cordless drills/screwdrivers with quick system are genius when it comes to frequent switching between drilling and screwdriving. In a matter of seconds the drill chuck with drill bit is changed for a bit holder with bit, without any tools. You cannot do it faster. In the event of jammed screws or when spot-drilling on smooth surfaces the impulse function that is standard for all LTX screwdrivers gives a helping hand. For demanding applicatins we recommend cordless drills/screwdrivers with brushless motors. If you rather attach importance to fast drilling and screwdriving, use cordless screwdrivers with a 4-pole motor.
Accessories for cordless drills/screwdrivers - Metabo battery packs and chargers
Drill bits for any material in any diameter as well as many sophisticated bit sets can be found in our range of accessories. With regard to the battery packs you can choose different capacities within the voltage class. Whether a proven Li-Power battery pack or an LiHD battery pack with high-performance cells - all battery packs come with a 3-year warranty, independent from the number of charging cycles. Our chargers quickly raise full power again in the battery packs, even 8 battery packs at once with the desktop charger ASC multi 8, if many cordless drills/screwdrivers and other devices are being used at the same time. Thanks to the Ultra-M technology, machine, battery pack and charger are always perfectly matched to each other: intelligend battery pack management and the patended AIR COOLED charging technology guarantee maximum performance and long service life.
Discover cordless freedom - now cross-manufacturer!
100% compatibility: All 18 V drills/screwdrivers can be operated with any 18 Volt battery pack from Metabo. Like this you are always on standby when you are on the go. The slide-on battery packs are replaced in a matter of seconds and off you go. Also the battery packs of other leading brands of the CAS partners can be used at any time. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market, based on Metabo's 30 years of competence and experience in battery pack technology. Discover the new dimension of the CAS battery pack system: www.cordless-alliance-system.com
Drilling, hammer drilling and chiselling without cable
With the 18V cordless hammers from Metabo you can drill holes in concrete up to a maximum diameter of 24 mm. The two largest cordless combination hammers KHA 36-18 LTX 32 and KHA 36 LTX manage even 32 mm in concrete without any problems. The battery-powered hammers thus can very well keep up with mains-powered SDS-plus rotary and chipping hammers. Equipped with high-performance hammer action, the cordles hammers deliver a very high single-impact energy for fast work progress in concrete and masonry. For chiselling also cordless combination hammers with rotation stop can be used. Almost all cordless combination hammers are operated with 18 volt battery packs. In addition to the cordless hammer KHA 36-18 LTX 32 that uses two 18 volt battery packs, there is the KHA 36 LTX, almost identical in design, which is operated with a 36 volt battery pack.
Dust-free drilling in concrete, stone and masonry
In closed rooms or areas sensitive to dust, dust-free drilling is needed. This is where the cordless hammer KHA 18 LTX BL 24 Quick comes in. It has an integrated extraction interface that permits dust-free drilling. The compact dust extraction ISA 18 LTX 24 is mounted quickly and without tools to the cordless hammer. It has a HEPA filter that catches even the smallest dust particles while drilling. The drilling capacity is maintained at 100% with this active dust extraction. 3 seconds delay after switching off the cordless hammer remove the residual dust from the drilled hole. This cordless combination hammer with dust extraction is unbeatable also when drilling over head. The dust extraction unit ISA 18 LTX 24 can also be ordered as accessory and can be retrofitted.
Metabo SDS-plus accessories for rotary and chipping hammers
Thanks to the SDS-plus tool holder of the cordless hammers the accessories can be changed in a jiffy. Hammer drill bit out, chisel in and off you go. In addition to the hammer also the quality of the accessory used is of great importance for perfect work results. Metabo offers an extensive range of high-quality SDS-plus hammer drills and SDS-plus chisels. Different quality classes with different product characteristics are available for the drills and chisels for the individual requirements. Standard diameters of the drills are available as an assortment in the respective quality class. Quick hammers are suited for drilling in wood and metal. The hammer chuck can be replaced without tools with the supplied keyless chuck for tools with cylindrical shaft. Like this any standard cylindrical wood or metal drill bit can be securely clamped and used.
Discover cordless freedom - now cross-manufacturer!
The Metabo cordless combination hammers of the 18 volt class can be operated with any 18 volt battery pack from Metabo. Since hammer drilling and chiseling are very power-intensive applications, the use of LiHD battery packs with high-performance cells is recommended. However, also standard Li-Power battery packs can be used. Maybe you are also using different Metabo battery packs with different capacities in alternation? No problem with 100% compatibility within the voltage class. Obviously they can be recharged with the same chargers so they will be ready for use. With immediate effect also the battery packs from other brands of the CAS partners can be used. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market. More information can be found here: www.cordless-alliance-system.com
The all-rounders for screwdriving, drilling and impact drilling
Cordless hammer drills are real multi-talents when it comes to drilling and screwdriving. They drill in wood, metal and thanks to the high-performance impact mechanism also in masonry. The smallest hammer drill weighs just about one kilogramme and is handy to use for small drilling and screwdriving applications. The hammer drills with a battery voltage of 18 volt are available in 3 performance classes L, LT and LTX each with different technical features. All have a two-speed gear with a high speed range and high torque for a powerful screwdriving capacity and versatile drilling and impact drilling. With the most powerful cordless hammer drill SBE 18 LTX you can drill in masonry like with a mains-powered tool up to a diameter of 18 mm. All this where and when you want - without cable, independent from the power grid.
The special feature of Metabo cordless hammer drills
All LT and LTX models are equipped with a high-performance impact mechanism for maximum drilling capacity in stone and masonry. For demanding applications we recommend brushless types that you can immediately recognise by the "BL" in the designation. They have an additional thermal overload protection that protects the motor from overheating. If you switch often between drilling and screwdriving use a model with Quick sytem. In a matter of seconds the quick chuck with inserted drill bit can be replaced with the Quick bit holder or Quick angle adapter including bit. The impulse mode of the LTX class helps effectively when screws are jammed or when spot-drilling on smooth surfaces. Further details such as the bright LED work light and the practical belt hook ensure even more comfort when working with our cordless hammer drills.
Sophisticated equipment and accessories for any application
Choose between a complete equipment solution with 2 battery packs, charger and robust plastic carry case or the machine without accessories in a carton box, since you already have several battery packs. Obviously you can also purchase battery packs and chargers separately, thus making the entire range of the entire voltage class available to you. By the way, all battery packs from Metabo come with a 3-year warranty, no matter how often they are charged. Often the quality of the accessory is decisive for a good work result. Therefore we recommend to use Metabo accessories also here. A wide drill bit range and numerous bit sets for different applications can be found in the accessory area and directly next to the machines.
100% compatibility - now also cross-manufacturer
Obviously, all 18 V cordless hammer drills can be operated with any 18 volt battery pack from Metabo: with proven Li-Power battery packs or the LiHD high performance battery packs. Like this you are always prepared when on the go and can start immediately. Battery packs are replaced in a matter of seconds and you are ready to start again. Now also the battery packs of other leading brands of the CAS partners can be used. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market, based on Metabo's 30 years of competence and experience in battery pack technology. Discover the new cordless freedom: www.cordless-alliance-system.com
High torques for heavy screwdriving applications
Cordless impact drivers - also called rotary impact drivers - are used wherever there are power-intensive screwdriving applications. And especially where there is neither power nor compressed air. Independently from the power grid, the cordless impact drivers can powerfully drive in and remove screws and nuts. Equipped with high torque ranges, cordless impact drivers are available with different bit retainers: Hexagonal socket ¼“ for screwdriver bits or male square ½“ to accommodate socket wrenches / sockets. The maximum torque for the smallest cordless impact driver PowerMaxx SSD is 105 Nm, then the impact screwdriver of the LTX class operated with the 18 volt battery packs with maximum torques / loosening torques of 200 Nm to 600 Nm for particularly heavy screwdriving applications. Thanks to the typical rotary impact movement, particularly low kickback working with high torques is possible.
Compact impact drivers with brushless motors
Three of the Metabo 18 volt cordless impact drivers/wrenches are equipped with brushless motors. This can be recognised by the "BL" at the end of the type designation. Highest efficiency and fast work progress characterise these models. In addition they have twelve speeds/torque levels for a particularly wide range of applications. If you mainly work with screwdriver brits, the SSD 18 LTX 200 BL Cordless Impact Wrench with hexagonal socket. Thanks to the automatic power shift (APS) function it is a specialist for self-driling screwdriving. The torque is reduced automatically after drilling to prevent overtightening. If you require a particularly compact, yet very powerful cordless impact wrench for driving in or loosening of nuts, use the 400 Nm powerful Cordless Impact Wrench SSW 18 LTX 40 BL. It has a very compact design and a robust die-cast aluminium gear housing. With an adapter this cordless impact wrench can also process screwdriver bits. A thermal overload protection protects the cordless impact drivers with brushless motors from overheating.
Accessories for using cordless impact drivers/wrenches.
Practical and particularly high-quality sets of socket wrenches and impact-proof screwdriver bits with a long tool life can be found in our range of accessories. They are suited for heavy screwdriving applications. 100% compatibility: For the battery packs you can choose from different battery pack types and capacities within the voltage calss. Whether proven Li-Power battery pack or an LiHD battery pack with high-performance cells for more power and even longer runtimes. All battery packs come with a 3-year warranty, irrespective of the number of charging cycles. Metabo chargers charge every battery pack quickly to maximum capacity, with the desktop charger ASC multi 8 even eight battery packs at the same time, if many cordless tools are used in parallel.
Discover cordless freedom - now cross-manufacturer!
All Metabo 18 V cordless impact drivers/wrenches can be operated with any 18 volt battery pack from Metabo. With immediat effect also the battery packs of other leading brands of the CAS partners can be used. CAS stands for "Cordless Alliance System“, the world's most efficient battery pack system on the market. Discover the new dimension of the CAS battery pack system: www.cordless-alliance-system.com
The cordless specialists for screwdriving applications in drywall construction
The cordless drywall screwdrivers from Metabo quickly and powerfully join gypsum plaster boards and gypsum fibre boards on wooden and metal substructures. Depending on the main application area, a particular screwdriver is suited best. The relation of speed and torque differs from model to model. The cordless drywall screwdriver SE 18 LTX 2500, for example, has a high torque and handles gypsum plaster boards and gypsum fibre boards on wooden and metal substructures very well. The almost identical cordless drywall screwdriver SE 18 LTX 6000 is the fast runner with high speed for fast work progress. It is ideal above all when it comes to gypsum plaster boards.
Light cordless drywall screwdrivers with sensible details
The drywall screwdrivers from Metabo operated with a 18 volt battery pack are useful helpers in interior development when many gypsum plasterboards or gypsum fibre boards are processed. Thanks to the compact design and their low weight of less than 1.5 kilogrammes, the special screwdrivers are ideally suited for comfortable one-hand operation. They all have a bit retainer with a 1/4" hexagon socket and are equipped with a magnetic bit holder. The low-noise claw clutch and the very finely adjustable depth guide permit precise and quick working. The depth guide can be removed completely when working "at sight level". The speed can be infinitely adjusted for material-compatible working. The integrated work light and a practical belt hook are other sophisticated details for the user.
With screwdriver magazine for fast driving in of screws in series
All Metabo drywall screwdrivers can be equipped with the robust screwdriver magazine SM 5-55. Standard 50-screw strips in common dimensions can be used. Fast and precise screwdriving in series is very well possible with this magazine attachment. Using such a cordless magazine screwdriver, the gypsum boards are screwed together even faster.
Discover cordless freedom - now cross-manufacturer!
The 18 V cordless drywall screwdrivers from Metabo can be operated with any 18 volt battery pack from Metabo. Since mainly the compactness and weight are important for these devices, the flat Li-Power battery pack with 2.0 Ah is a good choice. However, even larger battery packs of this volt class with higher capacities make sense if particularly long runtimes for plenty of screwdriving cycles are important to you. Maybe you are also using different Metabo battery packs with 18 volt alternately? No problem with 100% compatibility. From now an, the battery packs of other leading brands of the CAS partners can also be used. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market. Discover the large CAS battery pack system: www.cordless-alliance-system.com
Mobile multi-talent: The cordless multi tool from Metabo
No matter if sawing, sanding, scraping or grinding - the oscillating cordless multi-tool from Metabo is the right solution for countless applications. Thanks to the powerful battery pack and wide range of applications, it is the ideal companion for professionals, who would like to progress quickly in interior development or installation jobs and would like to do without cables.
The cordless multi-tool: Indispensable allrounder in construction trade
Whether cutting jobs for switches and socket outlets or adaptations in the stud framework: Different materials on the construction site or in the workshop can be processed quickly and accurately with the cordless multi-tool. This is possible thanks to the combination of poweful battery pack technology, large oscillation angle and VTC electronics, which keeps the speed constant even under load. The machine also fits well in the hand with its slim design and the non-slip soft grip surface. A double LED lamp brightly illuminates the work area and offers a better view of the initial cut in corners or dark spots. Sanding jobs are carried out with particular cleanliness with a connected vacuum cleaner.
Tool change in an instant - no problem with the cordless multi-tool
The cordless multi-tool is as powerful as a mains-powered tool and additionally offers maximum mobility. Thanks to the Ultra-M technology, the machine is compatible with all 18 volt battery packs and chargers from Metabo.
The Metabo "Quick" quick tool change permits a time-saving and comfortable exchange of the accessories and thus a quick change between different applications. All major accessories available on the market fit the bit retainer. Metabo offers the cordless multi-tool MT 18 LTX with the particularly enduring 5.2 Ampere hour battery packs or optionally also as MT 18 LTX Compact with 2.0 Ah battery packs. The scope of delivery already inclusdes the most important accessories, furthermore we offer you a wide range of other accessories.
Cordless cutting and grinding up to 230 mm diameter
Worldwide, metal professionals from trade and industry rely on Metabo cordles angle grinders. The battery-powered grinders have become vital in everyday work. Independent from the power grid, they can be used anywhere. Thanks to modern battery pack technology the deliver full power like a mains-powered tool. The entire range of diameters is available: 115 mm, 125 mm, 150 mm, 180 mm and even 230 mm! The large 230 mm cordless angle grinder is the world's first cordless tool in this class. It is available in 2 versions: One runs with a 36 V battery pack, the other one with the same power and with two 18 V battery packs that can also be used in all other 18 V machines. 77 mm cutting depth and powerful material removal when grinding speak for themselves. Its 2400 watt power is in no way inferior to the mains-powered angle grinders. The 180 mm cordless angle grinder with brushless motor has a comparably cutting depth with a large mains-powered angle grinder. However, it is significantly lighter and thus, for example, ideal for cutting operations on the roof.
Maximum power with perfect handling
The slim design of the cordless angle grinder up to 180 mm disc diameter makes the tools particularly handy. This permits low-fatigue working also in narrow components or overhead. Equipped with the quick system, the cutting and grinding discs can be replaced at the touch of a button without tools. Just like the guard: it can be adjusted without tools and is absolutely twist-proof. If needed, the battery pack can be rotated according to the work situation. For cutting and grinding with cordless angle grinders we recommend using LiHD battery packs. Maximum cell energy guarantee long runtimes at constantly highest performance. This means that less charging breaks are required and the working objective is reached faster.
With Metabo cordless angle grinders on the safe side
Working with angle grinder is not without danger, this is a fact. With our safety functions we would like to prevent and permit safe working. Often accidents are caused by loss of control, this is our starting point. For models with paddle switch and dead man function (P in the designation), the cordless angle grinder is switched off immediately after releasing the switch. If an additional braking system is integrated (B in the designation), the disc stops within 2 seconds after switching off. When the disc jams the kickback torque can hit the user with full force. This kickback is reduced extremely thanks to the electronic safety shutdown. Further safety functions are an integrated restart protection against unintentional starting and the soft start for smooth start-up.
All cordless angle grinders (except for the 36 V model) can be operated with any 18 volt battery pack. Also 18 V battery packs of our CAS partners can be used. Discover the new cordless freedom www.cordless-alliance-system.com. In addition to the battery packs and chargers, especially for cordless angle ginders, the grinding wheels also play an important role. We offer you an extensive range of cutting and grinding discs for any application area. Depending on the requirement, there are several quality classes available.
Fast and safe in acute angles: The cordless flat head angle grinder
Continues where others stop: Metabo is the world's first manufacturer to develop a cordless flat head angle grinder, which quickly and safely masters grinding jobs in acute angles. Thanks to its ultra-flat heat, the innovative machine permits working in angles down to 39 degrees. Mainly professionals in the metal and railing industry, in locksmith's shops or plant engineering and shipbuilding. Improvised stopgap solutions are thus a thing of the past. With the cordless flat head angle grinders you work completely independent from the power supply in acute angles in a quick, productive and safe manner.
Permits powerful, safe and comfortable working: the cordless flat head angle grinder
You don't have to get the die grinder or the comparatively expensive carbide cutters or even other non-standard methods to smoothen short weld seams in angles: with the flat head angle grinders you progress significantly faster and also achieve a visible cleaner finish. Whilst previously the wire brush was the only solution to remove rust, weld slug and old lacquer in angles of frame constructions, the flat head angle grinder offers a much more efficient solution here. With the cordless flat head angle grinder you save more than only time and energy when purging and cleaning of root seams or when cutting pipes at hard to reach spots: compressed air chisel or completely unreliable improvisations are a thing of the past.
The cordless flat head angle grinder - practical and with a large disc selection
Typical for Metabo, the cordless flat head angle grinder offers many practical extras: the guard can be adjusted without tools, fixed twist-proof and removed for cleaning without having to remove the disc. The grinding discs can also be replaced easily and without additional key thanks to the Quick system. Overload and restart protection also guarantee maximum safety for the user and machine. Moreover, Metabo offers accessories that have been developed especially for working in narrow angles and U-profiles. Long working is no problem thanks to the 5.2 Ah battery packs, which come as standard with the cordless flat head angle grinders.
Maximum productivity when cutting, grinding and milling
Whether cutting, grinding or milling- what coulds is an optimum result. We at Metabo do not make any compromise and provide you with customised professional tools including matching accessories for any application.
Cutting, grinding or milling? Metabo offers innovative problem solvers for metal processing
For demanding cutting and grinding applications in the metal trade and metal industry, professionals use our angle grinders, die grinders, sheet shears, nibblers, angle polishers and bench grinders or our special machines for processing stainless steel, since they know that they can always rely on their Metabo machine. Metabo comes into play wherever angle grinders with the greatest possible safety and highest productivity for most demanding applications are used. Whilst our large angle grinders offer maximum performance and robustness, we set standards with our compact class thanks to ultimate productivity, perfect ergonomics and unbeatable system power. These characteristics make our angle grinders the essential element for cutting and grinding. With our angle grinders and special solutions like our complete machine range for processing stainless steel or the world's first flat-head angle grinder for working in narrow angles, we offer you the right solution for every challenge.
Flexible grinding and milling of different materials
Our Metabo solutions focus on highest precision and comfortable handling so that you can work productively when it comes to grinding and milling and achieve perfect results. We offer you the optimal system solution for every requirement with our random orbital, band and triangular base sanders, our sanders, planers and routers, paint removers and wall chasers.
Slim line, powerful performance - Metabo die grinders
Metabo die grinders can be operated, depending on the model, with mains power, battery packs or compressed air. The mains-powered die grinders are available with a rated input power of 710 watt or alternatively a high-torque variant with 950 watt. The cordless die grinders are part of the large 18 volt cordless class and can be operated with any 18 volt battery pack from Metabo. All air die grinder are equipped with EURO, ARO/Orion and ISO plug-in nipples for all standard connection systems. Metabo die grinders are among the slimmest and most compact machines on the market. The powerful motors of the mains-powered and cordless die grinders offer maximum productivity with high precision for all applications.
Metabo die grinders for any application
Wherever metal constructions are manufactured, a robust die grinder must not be missing. They cut and grind precisely there where other grinders no longer reach. The tools with long grinding spindle are ideally suited for deburring or smoothening of weld seams in hard-to-reach areas. The die grinder GE 710 Compact has a particularly short, compact design for working at inside curves or other narrow spots where every centimetre matters. Some die grinders have a particularly high torque with reduced speed range for powerful grinding with flap wheels. All Metabo die grinders have a precision collet for precise concentricity and a spindle lock (except GE 710 Compact) for simple and fast tool change. For effortless working appropriate flexible shafts can be used.
Safety for man and machine when grinding and cutting
All mains-powered and cordless die grinders have an electronic safety shutdown. The motor is switched off immediately when the tool used jams. This protects user and machine from sudden reverse torque. An integrated overload protection ensures long service life of the motor. The restart protection prevents unintentional start-up of the machine after a power cut to protect the user. The handy and slim design permits safe and low-fatigue handling of the tools in any working position and thus prevents a dangerous loss of control. Die grinders with long grinding spindle have a removable protective rubber cap for comfortable and safe working.
Extensive accessoried for die grinders
A wide range of carbide cutters is offered by Metabo: All application-relevant shapes and toothed gears as well as special cutters for aluminium with a special gearing are available. Metabo also offers mounted points made from aluminium oxide and pink aluminium oxide in the standard shapes. Flap discs with different widths and grits as well as small roughening discs and small cutting discs round off the range of the high-quality tools. Only when the accessory is ideally matched to the machine being used, perfect work results can be achieved. For the cordless die grinders different battery packs and chargers are offered. This permits the use of the cordless die grinders even where there is no wall socket.
For sharpening, deburring, grinding and polishing
Metabo bench grinders have a wide range of application. From the simple removal of rust on a spatula to rounding or polishing of metallic workpieces many applications are possible. Two grinding wheels with different grit and version make different operations on one grinding support. The smallest Metabo bench grinder DS 125 and DS 150 are space-saving workshop machines for grinding wheels with a diameter of 125 mm or 150 mm. Further bench grinders have a disc diameter of 175 mm, 200 mm or 250 mm. The DSD 200 and DSD 250 are the most powerful grinders thatnks to a powerful three-phase motor with particularly high torque. All other bench grinders are equipped with a motor for single-phase alternating current.
The special machines for special tasks
The combo bench grinder BS 175 has a large belt grinding arm that can be inclined infinitely instead of a second grinding wheel. Like this wood or metal workpieces can be processed comfortably. Matching sanding belts are available as accessories. Another specialist is the combo bench grinder TNS 175. It uses a wet and a dry grinding wheel with 175 mm diameter. Thanks to the combination of wet and dry grinding many other application areas can be covered.
Details for safety and comfort
All Metabo bench grinders have a maintenance-free induction motor that runs in a particularly quiet and low-vibration manner. The robust guards are fixed on the double grinding supports with a bayonet closure, which permits fast and easy disc change. Large spark protection glasses protect the user from flying sparks that are dangerous above all to the eyes. The additional wearing of safety goggles is therefore strongly encouraged. The restart protection prevents unintentional start-up after a power cut to protect the user. Tool-free height-adjustable workpiece supports and vibration-dampening rubber feed for safe stand are other details for safe and comfortable working with the Metabo bench grinders.
Grinding wheels, sanding belts and machine stands as accessories
Grinding wheels made from aluminium oxide, pink aluminium oxide and silicone carbide as well as wet grinding wheels are available in the relevant diameters in the Metabo range of accessories for bench grinders. A practical machine stand with tool storage and a wall panel permit space-saving positiniong of a Metabo bench grinder and can also be bought as accessory. A sophisticated system solution from Metabo from the machine to accessories.
Metabo angle grinders for any application
More and more companies from metal trade and industry rely on Metabo angle grinders. The powerful machines with overload capacity have become vital in every day work. When cutting or roughening metal they do a good job, in connection with diamond cutting discs even stone and concrete can be cut. Metabo angle grinders are available for all disc diameters in varied versions for mains operation with a rated input power of 750 to 2,600 watt. Alternatively, Metabo has many powerful cordless angle grinder up to a disc diameter of 230 mm in its programme range. For companies working with compressed air, there are two air angle grinder for 125 mm discs. Entry criterion for angle grinders is the disc diameter. Discover your Metabo angle grinders Ø100-150 mm in the range up to 150 mm or angle grinders Ø180-230 mm in the range of 180 to 230 mm disc diameter. All models are equipped with guard, clamping set and side handle.
Specialist for stainless steel and acute angles
If if gets tight for others, the flat-head angle grinders gets only started. The specialist with the particularly gear head can grind down to narrow angles of 39° ((at 150 mm diameter). Therefore it is ideal for removing rust, lacquer or welding sludge in narrow frame constructions and when working in confined spaces. There are flat-head angle grinder both with cable and also as cordless for operation independently from the power grid. Some angle grinders are developed especially for processing stainless steel. A thigh torque and a reduced speed range adapted to stainless steel ensure cool grinding without blue discolouration. These specialist carry the word Inox in their names and are available in different versions, also as flat-head angle grinders Inox.
With Metabo angle grinders on the safe side
Working with angle grinders is not without danger. High forces and permanent vibrations can lead to loss of control. With our safety functions we would like to prevent and permit safe working. For angle grinders with dead man function (P in the designation), the motor is switched off immediately after releasing the switch. If an additional braking system is integrated (B in the designation), the disc stops within 2-3 seconds after switching off. When the disc jams in the material, the kickback torque can hit the user with full force. This kickback is reduced extremely thanks to the Metabo S-automatic safety clutch or an electronic safety shutdown (depends on model). For angle grinders with an Auto-balancer (A in the designation), imbalances on the discs are balanced for particularly low-vibratio and low-fatigue working. Further safety functions are the restart protection against unintentional starting after a power cut and the soft start for smooth start-up. Some angle grinders have all these safety functions
integrated and thus offer the best possible user safety.
The right disc matters
Metabo has an extensive range of cutting and grinding discs for any application area. Depending on the requirement, there are several quality classes in all relevant diameters: from basic quality with good cutting and material removal to premium quality with very high cutting performance and maximum tool life. For cutting concrete and stone, the Metabo diamond cutting discs are used. Even here there are quality classes for all requirements in all relevant diameters. Further cutting and grinding accessories such as cup wheels, flap discs, fibre dics and cleaning fleeces as well as steel-wire brushes for cleaning, deburring and rust removal as well as special accessories for processing stainless steel can be found in the Metabo range of accessories for angle grinders.
The Metabo compact angle grinders: Maximum performance with smallest overall size
You define the limit with our angle grinders - not your machine. With devices from 720 to 1,700 Watt and for disc diameter from 100 to 150 mm, Metabo offers the right system solution for every requirement and every application - including matching accessories.
The compact angle grinders - more efficient working by virtue of Metabo Marathon motor
Thanks to the extremely powerful, patent-pending Metabo Marathon motor and an innovative ventilation concept you can work with our angle grinders in almost all situations without interruptions. No matter how you challenge the devices: Our powerful angle grinders are unbeatable in terms of robustness, overload capacity and productivity. At the same time they impress with a small handle circumference and excellent device geometry.
The Metabo compact angle grinders guarantee safe working on your construction site
Even safety has top priority: Almost all our compact models have the mechanical S-automatic safety clutch proven since 1966, which decouples the motor without time delay when the disc jams. We thus offer the most reliable anti-kick-back system on the market, which reduces kickbacks to an absolute minimum. We also offer our angle grinders from 1,250 to 1,700 watt with a combination of paddle switch with dead man function and patented mechnical disc brake: The fastest brake system on the market offers highest user protection and stops the disc after switching off even in case of a power cut in less than two seconds. Also from 1,250 watt, some machines are available with integrated Auto-Balancer. By virtue of this most effective anti-vibration system on the market and the Metabo VibraTech side handle, you can work with Metabo angle grinders for more than eight hours in continuous mode without any problems. Vibrations are reduced to a minimum. At the same time, roughing discs last up to twice as long due to the lower vibrations.
The right accessories for any application: Metabo compact angle grinders
Matching our powerful compact angle grinders, we offer professional accessories for any application: Flap discs, fibre sanding sheets, special Inox sanding media or the high-performance cutting and roughing discs with ceramic abrasive grain of the M-Calibur series ensure optimum results and maximum productivity.
With compact angle grinders of all performance classes and special matched accessories, we offer professionals in industry and trade the perfect system solution for any application - productive, robust, ergonomic and safe.
Ultra-powerful problem solver for narrow angles: Down to 39°. The new Metabo flat-head angle grinders.
Continue where others stop: Metabo is the first manufacturer worldwide to develop a flat-head angle grinder, which masters grinding tasks in narrow angles in a fast and safe manner. With its ultra-flat heat, the innovative machine permits working in acute angles down to 39 degrees. Mainly professionals in metal and railing construction, in locksmith's workshops or in plant engineering and ship construction benefit from this. Improvised stopgap solutions are a thing of the past. With the flat-head angle grinder you work in narrow angles completely independent from the power supply in a fast, productive and safe manner.
The flat-head angle grinder is powerful, safe and comfortable.
Now you don't need to use the die grinder or the comparatively expensive carbide cutters or even other non-standard methods to smoothen short weld seams in angles: with the flat head angle grinders you progress significantly faster and also achieve a visible cleaner finish. Whilst previously the wire brush was the only solution to remove rust, weld slug and old lacquer in angles of frame constructions, the flat head angle grinder offers a much more efficient solution here. With the cordless flat head angle grinder you save more than only time and energy when purging and cleaning of root seams or when cutting pipes at hard to reach spots: compressed air chisel or completely unreliable improvisations are a thing of the past.
Practical and with a large disc selection: The Metabo flat-head angle grinder
Typical for Metabo, the flat head angle grinder offers many practical extras: the guard can be adjusted without tools, fixed twist-proof and removed for cleaning without having to remove the disc. The grinding discs can also be replaced easily and without additional key thanks to the Quick system. Overload and restart protection also guarantee maximum safety for the user and machine. Moreover, Metabo offers accessories that have been developed especially for working in narrow angles and U-profiles. Long working is no problem thanks to the 5.2 Ah battery packs, which come as standard with the cordless flat head angle grinders.
Efficient processing of stainless steel with Metabo power tools
Whether in container construction, as facade area or railings: Only few materials find such varied use like stainless steel and require at the same time so much craftsmanship. When smoothing weld seams, removing tarnishing, processing of surfaces or edges and high-gloss polishing, highest precision and machines perfectly adapted to the material are very important.
The right tool from Metabo for any application
For stainless steel surface processing there is no universal tool, since surfaces, pipes, profiles corners and edges have different demands for the power tools. Therefore, Metabo offers the right tool for any task with a wide Inox range and also perfectly matched accessories - from Inox angle grinders to fillet weld grinder, burnishing machines and tube belt sander to band files and angle polisher. Using the Metabo power tools for stainless steel processing you will carry out any task at the hightest level from rough grinding to satin-finish and mirror polishing.
The Metabo Inox specialists with and without cable
The adjustable, low speeds and the high torques of the Metabo Inox tools prevent overheating and blue discolouration of the stainless steel - at the same time the machines deliver even under maximum load constant speeds and thus perfect results. Thanks to the high torque you can work with these machines in a particularly powerful and fast manner. The complete stainless steel programme from Metabo is equipped with motors capable to handle extreme overloads - like this you can always rely on your machine. Be it in the workshop or without direct power supply on the construction site. Metabo is the only manufacturer worldwide to offer all Inox machines also as cordless versions. For perfect results far away from the power outlet - any time. To make you mobile when processing stainless steel, Metabo offers you the widest range of cordless Inox tools on the market: the cordless angle grinder Inox, cordless fillet weld grinder, cordless burnishing machine, cordless tube belt sander and the cordless band file. They are part of the large 18 volt class from metabo and can be operated with any Li-Power or LiHD battery pack and charged with any matching charger. Metabo relies on 100% compatibility within the voltage class. Even the battery packs of other leading brands of the CAS partners can be used. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market. Discover now at www.cordless-alliance-system.com
Perfect work results with the right accessories
Special attention has to be paid to the accessories used for the most demanding material, stainless steel. Metabo has an extensive range of accessories matched especially to the processing of stainless steel. Fleece sanding pad and flap disc for the Inox angle grinders, sanding belts in different versions and grits for the tube belt sanders and band files, grinding wheels and rollers for the burnishing machine and many other accessories for processing stainless steel get the best out of the Inox machines and ensure shiny results when working.
Random orbital sanders for sanding wood and much more
Random orbital sanders can be used for very varied applications. They are suited for sanding and polishing of surfaces made from wood, metal and other materials. Thanks to the typical rotating and oscillating movement a particularly uniform grinding result is achieved. Both sanding jobs with high material removal and uniform fine grinding can be carried out. The grinding media used and the size of the oscillating circuit are the determining factors of how coarse or fine the sanding result will be. Metabo random orbital sanders are available for sanding sheets with the diameters 80 mm, 125 mm and 150 mm.
The ideal Metabo random orbital sander for any application
Economical working, high surface quality, excellent extraction performance, perfect ergonomics - these are the requirements for a good sander. All Metabo random orbital sanders can score here and each of them has its very particular application focus: The small random orbital sander SX E 400 shows its advantages on small surfaces and curves. The versatile SXE 450 TurboTec can show its potential with its "Duo" oscillating circuit setting for fine and coarse applications. The two random orbital sanders with brushless motor SXE 150-2.5 BL with 2.5 mm / 5 mm orbit diameter provides enormous power and perfect surface quality with extremely compact dimensions and very low weight. If a company works with compressed air tools, the Metabo air disc sander DSX 150 for coarse and fine sanding applications on even and curved surfaces is available.
Special characteristics of Metabo random orbital sanders
Almost all random orbital sanders have speed regulation. Thanks to this you can always work with speeds adjusted to the material. Depending on the model, Metabo random orbital sanders are equipped with other special features: With the Turbo boost function you have additional power reserves at your disposal at the touch of a button for maximum material removal. The Power Control System prevents scratches on the surface when placing the machine directly on the material at full speed. A disc brake permits fast placing down of the sander after switching off. Equipped with a sanding pad with multiple perforation, the generated grinding dust can be extracted most effectively. Obviously, all random orbital sanders from Metabo offer the possibility to connect a vacuum cleaner for dust extraction for low-dust working.
Accessories for best work results with the random orbital sanders
Metabo has a large selection of sanding papers on offer. Sanding sheets in grits P40 to P 400 for wood and metal are offered for all relevant diameters and perforations. Also some assortments with different grits are available. For sanding paint and lacquer there is an additional complete range of cling-fit sanding sheets in the same grits. Polishing sponges and lambswool polishing discs round off the range. Just like the thick hook and loop intermediate discs that are placed between sanding pad and sanding paper to permit sanding of curved surfaces and contours. For the integrated dust extraction, dust collector cartridges and dust bags can be used. Much more efficient, however, is the external extraction, for which the Metabo all-purpose vacuum cleaners are ideally suited.
Versatile and precise: The routers from Metabo
For craftsmen, the router is probably the most versatile power tool there is. All the more important are the quality and reliability of the tools: With the handy and powerful router from Metabo you can cut grooves, chamfer, profile, rebate, drill and mill in a precise and powerful manner. No matter if you use the router for cutting accurate grooves or rebates for stable connections, process wooden edges, cut profiles in furniture or use for free-hand milling: With the routers from Metabo you are ideally equipped for any application.
Top model for versatile use: The Of E 1229 Signal router from Metabo
The Vario-Tacho-Constamatic (VTC) electronics of the Of E 1229 Signal router from Metabo always ensures for speeds adapted to the material and application. Using the thumbwheel, you can set an idle speed between 5,000 and 25,500 rpm. The router also permits fine setting of the cutting depth down to 0.1 mm in accuracy. Using the three-stage stop you can preselect up to three different cutting depths. 1,200 watt rated input power and the advantages of the Vario-Tacho-Constamatic offer highest technical comfort. Electronic monitoring of the coil temperature warns in case of overload of the router. The integrated tacho generator keeps the speed constant even under load. The router ensures even in difficult conditions and very low speed settings that the speed remains constant.
Matching the routers, Metabo offers an extensive range of accessories - from collets, high-quality cutters and guides to mitre fences, template followers and flexible shafts.
Efficient and robust: Renovation grinders from Metabo
In the past users often used a chisel hammer or angle grinder for the removal of concrete, plaster or screed - a tiring and dusty undertaking. The robust and powerful renovation grinders from Metabo help you to carry out your work faster, more efficiently and with effective extraction.
A powerful duo - the vacuum cleaners and renovation grinders from Metabo
For sanding old layers and coatings at walls, ceilings and floors, we offer you with two machines, effective extraction solutions and matching cup wheels a powerful system: The RS 17-125 renovation grinder is extremely capable to handle overloads and designed especially for hard jobs on the construction site. By virtue of its powerful Metabo Marathon motor with 1,700 watt rated input power, it endures hours of continuous use without getting hot. This permits to you reliably sand large areas. With the RS 14-125 we offer plasterers, floorers, painters and persons effecting complete restorations an extremely compact and ergonomic sander, which is particularly suited for use on small areas or even for delicate materials. Its no-load speed can be set infinitely and can be optimally adjusted to the material to be processed.
Both grinders have a spring-mounted brush rim that adapts to the material surface and thus permits optimal dust extraction. The aluminium die-cast guard makes the machines particularly robust and offers a practical extra: Their front part can be folded upwards, without having to remove it and thus risk losing it. With the guard folded up you can sand right up to the edge of a wall, ceiling or floor. This saves tedious manual reworking. The ergonomically shaped, tool-free adjustable bar handles help to guide the grinder in a safe and uniform manner.
Effective extraction and matching accessories for your renovation grinder
Metabo offers a wide range of accessories for both grinders that is adapted to the different applications. This includes for example different diamond cup wheels and a special PCD cup wheel for the removal of thermoplastic materials. With the renovation grinders and different cup wheels you can, for example, remove coatings, hard cement plaster, concrete, adhesive remains and much more in a clean and fast manner. Vacuum cleaners, like the ASR 35 M ACP, which can optimally handle even large amounts of dust, can be connected to both hand-held renovation grinders and deliver particularly clean finishes.
Powerful and with large diameter: The renovation grinders from Metabo
Old coatings and layers on walls, ceilings and floors can be removed easily using the renovation grinder whilst protecting the user's health. The large milling diameter ensure quick progress and efficient working. In combination with a Metabo extraction system, the milling machine ensures a particularly clean finish.
Ideal solution for renovation applications - the renovation grinder
Who wants to efficiently remove plaster, adhesive remains, soft screed or old paint whilst protecting his/her health, uses the renovation grinder from Metabo. With its triple reduction high-performance gear, it reaches a torque of nine Newton metres, resulting in the powerful and efficient removal of coatings. Thanks to the large milling diameter of 115 mm, you progress particularly quickly with the renovation grinder and can process even larger areas in a short time. The cutting depth can be adjusted without tools and only with only one hand movement from 0 to 6 mm. If you have to remove coatings from walls for several hours, you will appreciate the fast work progress and the powerful removal.
Innovative and practical working with the renovation grinder from Metabo
The ergonomically-shaped bow-type handle can also be adjusted without tools in different positions and also folded, if needed. This is particularly practical, for example, when you have to grind along a surface behind scaffolding. The renovation grinder has a chamfered front edge with protective metal plate so that you can grind at the edge at railings, ceilings or walls. This saves time-consuming manual reworking. The die-cast aluminium guard is particularly robust and provides the machine with high quality and a long service life. The spring-mounted brush rim also adapts to the material surface and thus permits optimal extraction. The matching vacuum cleaners from Metabo are designed especially for renovation applications where plenty of dust is generated. The AST 35 M ACP is particularly suited as a system, which is equipped with fully-automated filter cleaning. A wide range of accessories complements the extensive system offer: Whilst the pointed milling stars create a rough surface with hard materials, the flat milling stars are mainly suited for soft materials such as adhesive remains or soft plaster. In combination with vacuum cleaner and accessories, you will achieve an optimal finish with the renovation grinder every time.
Lightness meets flexibility: Long-neck sanders from Metabo
Using the Metabo long-neck sanders, painters, plasterers and drywall constructors give the right finish to primed surfaces at the wall and ceiling. You can choose between two models - with or without flexible length adjustment. With the drywall sanders you work even in high rooms in a fast and comfortable manner with effective extraction.
They are light and compact - the Metabo long-neck sanders
Both machines allow you to efficiently carry out sanding work without a ladder right to the edge of the wall or ceiling. Whilst the LSV 5-225 with a weight of 3.9 kilo is among the lightest machines in its class, the comfort model with a variable length-adjustment offers maximum flexibility: For sanding applications at great height, the 1.60 metres long handle bar can be extended to up to 2.10 metres - the extension piece is available in the accessories section. In narrow rooms you can shorten the machine to 1.10 metres, for easy transport in can be completely disassembled.
Thanks to the patented M-Clean technology, extraction in both models is done effectively directly through the machine housing. There are no disturbing hoses at the sanding head, thus making it particularly flexible. This also eliminates maintenance of the hoses. Thanks to its spring-mounted brush rim, the sanding head optimally adapts itself to the surface. The flexible shafts of the two robust grinding machines can also be replaced, if needed, easily without any tools. The machines come with a replacement shaft, which makes the drywall grinders ready for use at any moment. The LSV 5-225 Comfort is the only long-neck sander on the market with an integrated LED lamp, which illuminates the sanding area even in dark rooms, such as staircases or bathrooms. This helps to quickly detect and process any eventual unevenness.
Easier working without long-neck sanders by virtue of perfect ergonomics
The 500 watt powerful motors are not installed in the head, but in the rear handle area of the machine. Compared to other models on the market, this leads to a significantly improved balance - work is easier and you progress faster. The T-shaped handle fits well in the hand and the machines can be safely put down, without the cable or the hose kinking. Both drywall sanders are part of a complete system solution with which Metabo offers professionals a wide range of sanding media and further accessories such as matching extraction systems - for example the ASR 35 L or M ACP vacuum cleaners.
Quality from the beginning: Drilling, screwdriving, chiseling and stirring with Metabo complete systems
It all started with the hand-held drill: In 1924 our company founders developed and sold the first metal drills that gave the Metabowerke GmbH its name later on. In 1957, our company introduced the first impact drill manufactured in series and has been continously developing it ever since. Further world firsts followed, like for example the first cordless magnetic core drill. In the meantime, we are an internationally leading manufacturer of power tools and accessories. However, we have never forgotten our roots. For decades, the name of Metabo has been standing for professional drilling technology that is characterised by high quality and safety. We offer almost all our solutions for drilling, screwdriving, chiselling and stirring in a cordless version. Thanks to our powerful battery pack technology that we are continuously developing, many of our cordless machines are in no way inferior to the mains-powered machines in terms of performance.
Always a reliable partner for professionals when it comes to drilling, screwdriving, chiselling and stirring
Metabo's tools for drilling, screwdriving, chiselling and stirring connect the best from more than 90 years of development experience. Powerful, compact and designed for highest safety, they are reliable partners for professional users worldwide. Our robust impact drills are up to any challenge on the construction site and in the workshop. The drills set standards with performance and precision and guarantee optimal results. Thanks to the Metabo Quick system, you change chuck, angle attachment or bit holder quickly and without any tools. With our drill and chisel hammers you progress quickly and safely in hard materials such as stone or concrete. The high-performance hammer mechanisms of our hammers withstand even the hardest mechanical load and make the machines the ideal tools for extreme applications. Our screwdrivers and impact drills give your work the right turn, just like the stirrers that even tackle viscous material reliably. With our wide range of drywall screwdrivers, we offer customised solutions for the driving in of large volumes of screws in different application areas. All our power tools are here connected by high performance with perfect ergonomics and low weight. In addition, Metabo offers every accessory professionals need for drilling, screwdriving, chiselling and stirring.
Power packs for demanding applications: The Metabo rotary and chipping hammers
Metabo's powerful hammers are always the right choice when it comes to processing hard materials such as stone or concrete. The pneumatic impact mechanism generates high-energy impacts with almost no extra force required from the user. The high performance hammer mechanism is precisely mounted in a housing made of aluminium alloy, which is resistant even to the hardest mechanical loads. The enormous power combined with user-optimised ergonomics make the Metabo hammers the ideal tools for demanding applications. From compact cordless, multi, drill and combination hammers in the SDS plus range to the extremely powerful SDS max combination hammer KHE 96 with 1,700 watt and 20 joule single impact energy (according EPTA) we have the right machine for every application.
Maximum mobility with the cordless hammers from Metabo
Metabo offers you maximum mobility with its cordless hammers: The KHA 36 LTV cordless combination hammer with 36 volt combines the advantages of mains-powered machines with the flexibility of a cordless tool. With its maximum single impact energy of 3.1 joule it is however a real power pack. The combination hammer drills holes up to 32 mm in diameter into concrete without any problems. Thanks to the high battery pack performance and capacity and the quick drill progress, using this machine, you do not only work in a powerful, but also in a particularly efficient manner in the workshop, on the construction site or in the industry. Our particularly compact and versatile KHS 18 LTX cordless combination hammer with a high single impact energy and low weight impresses in the 18 volt class.
Metabo offers a comprehensive range of accessories for all professional tools: from carbide-tipped hammer drill bits with two or four cutting edges and different chisels to carbide tipped router bits and drill bits, at Metabo you find everything you need.
Metabo hammers for demanding applications in stone and concrete
Metabo's powerful SDS-hammers are always the right choice when it comes to processing hard materials such as stone or concrete. The pneumatic impact mechanism generates high-energy impacts with only minimal extra force required from the user. The high-performance hammer action is precisely mounted in a housing made of aluminium alloy, which is resistant even to the hardest mechanical loads. This enormous power combined with user-optimised ergonomics make the Metabo hammers the ideal tools for demanding applications. Equipped with the proven SDS-plus tool holder, the used accessories can be changed quickly and without any complications.
Which Metabo hammer for which application area?
If you change between drilling and chiselling jobs, the Metabo combination hammer is the ideal power tool. With these SDS-plus hammers you can drill holes up to 32 mm (depending on model) in concrete and stone. Thanks to the integrated rotation stop the combination hammers are ideally suited for the removal of tiles. Drill out, chisel in, activate rotation stop and then you can start to chisel. Even drilling in wood and metal can be performed by these versatile rotary hammers without problems. With the suitable drill chuck, you can carry out this task in drilling mode even without impact. For combination hammers with quick system, the SDS-plus hammer chuck can be changed quickly and without tools against a Quick keyless chuck. Like this you can also work with drill bits with cylindrical shaft. The multi hammers offer even more application possibilities when drilling since a second gear with higher speeds can be selected. If you want to perform only hammer drilling tasks, you can use two pure, weight-optimised SDS-plus rotary hammers without chiseling function.
Cordless hammers from Metabo for the cordless construction site
If there is no wall socket within reach, the cordless hammers are always ready for use. Fitted with an 18 v battery pack you can hammer drill, drill and chisel like with a mains-powered hammer of comparable size. Two cordlss combination hammers provide even more power with two 18 volt battery packs (KHA 36-18 LTX 32 Cordless hammer) or with a 36 volt battery pack (KHA 36 LTX). If you need to work in dust-sensitive rooms, the 18 volt cordless hammer KHA 18 LTX BL 24 Quick is unbeatable. It can be used with an integrated dust extraction for almost dust-free drilling in concrete and stone. All this independent from the power grid, operated with any Li-Power or LiHD 18 volt battery pack from Metabo.
SDS-plus drill bits, chisel bits from Metabo for any requirement
A wide range of SDS-plus hammer drill bits and chisel bits in different quality classes wait for their use. The "Classic" series stands for solid, robust and reliable hammer drill bits and chisel bits. The application tools of the "Professional/Pro3" series are drill bits and chisels from especially hardened steel and thus particularly high-quality and durable. The top tier is called "Professional Premium" and includes hammer drill bits and chisels that have the maximum number of features you can expect. Innovative characteristics permit excellent work results even under the most demanding conditions.
Hammer drilling and chiselling with Metabo SDS-max hammers
Metabo combination hammers and chipping hammers that are equipped with an SDS-max bit retainer, are constructed for particularly demanding application areas with highest requirements. Drilling and chiselling in concrete and stone are extremely demanding on machine and tools. A high impact energy is required for fast work progress. It is mainly determined by two things: on the one hand by the power of the motor and on the other hand by the impact mechanism of the hammer that applies the force to the tool. High-quality hammer drill bits and chisels ideally complement the performance of the Metabo hammer. Maximum drill performance or the best chiselling results can be achieved only when all components of the hammer system are adapted to one another. Metabo get to the heart of both: Powerful SD-max hammers and a high-quality range of accessories for hammer drilling and chiselling.
Combination hammers from Metabo for changing application areas
When you have to hammer drill and chisel alternately, an SDS-max combination hammer is the ideal power tool. Thanks to the SDS-max bit retainer, drill bits and chisel bits with SDS-max drill shaft are quickly replaced, safely anchored and ready for the next job. Vibrations are an important topic in hammers. Thanks to the Metabo VibraTech (MVT) technology all possibilities for vibration reduction are exploited. Decoupled handle areas, integrated damping elements and other details ensure working with the lowest amount of vibrations possible. Further safety functions are the soft start and the S-automatic safety clutch that immediately decouple the drive mechanically when the drill bit jams in the material. The generated reverse torque on the user (kickback) is thus reduced extremely. Maximum user safety is top priority for Metabo.
SDS-max chipping hammers with maximum performance
For pure chiselling work, Metabo offers weight-optimised, powerful SDS-max chipping hammers. Up to 20 Joule of single-impact energy hit stone or concrete strike after strike. Thanks to the side handle that can be positioned flexibly and a lockable switch for continuous mode, these robust SDS-max chipping hammers can be safely guided by the user. The integrated Metabo VibraTech (MVT) damping system reduces the vibrations as much as possible to protect the user when chipping.
SDS-max hammer drill bits and chisels for high requirements
Every power tool can only be as good as the tool used. This applies also and in particular when hammer drilling and chiselling. Metabo therefore recommends the use of Metabo accessories for SDS-max combination hammers and chipping hammers. SDS-max drill bits and SDS-max chisel bits from Metabo have particularly high-quality properties and complement the Metabo hammers in an ideal manner: Quick drilling progress and highest material removal when chiselling. Different quality classes cover any range of requirement, also SDS-max dust extraction drill bits for low-dust drilling are part of the range. Concrete core cutters with SDS-max shaft in diameters from 45 mm to 80 mm are also available. A coordinated and sophisticated system for work results that meet even the highest of expectations.
Impact driling with over 60 years of experience
Metabo is the first large series manufacturer of impact drills and thus committed to high quality standards. The genius combination of large speed range, sensitive electronics, powerful torques and the selectable impact function make Metabo impact drills to real all-rounders. The can drill with impact in roof tiles, stone and concrete, drill without impact in wood and metal and obviously drive in screws without drill chuck thanks to the hexagon socked in the spindle for the direct accommodation of bits. Our range starts with a rated input power of 650 watt with handy machines clearly below 2 kilos of working weight. The most powerful impact drills with all technical refinements operate with 1,300 watt and weigh only 1 kilo more. Large holes in masonry with a diameter of 24 millimetres are no problem for it.
Metabo advantages for performance and safety
User safety is the top priority at Metabo. All impact drills from 700 watt are equipped with the Metabo S-automatic safety clutch. When the drill bit jams, the drive is automatically decoupled mechanically to minimise the reverse torque on the user. A restart protection prevents unintentional start-up of the impact drill after a power cut. The Metabo Marathon-motor with integrated dust protection has an extremely long service life. In the more powerful models overheating is prevented with an integrated overload protection. Most models have a speed selection for working adapted to the materials, a two-speed gear and heat-dissipating aluminium die-cast gear housing. The top models are also equipped with constant electronics as well as an impulse function. What is important for you when it comes to drilling and impact drilling?
Do more with the right accessories
To get you started right away, an impact-proof drill chuck, depth guide and side handle are part of the scope of delivery. Whether geared chuck or keyless chuck, both types hold the drill bit firmly and safely in place, even for demanding applications. You should also focus on quality when it comes to drilling. Impact drills can achieve the optimal result only with quality accessories. Our range of drill bits is adapted to our impact drills in all aspects. For any material, in any relevant diameter. The practically compiled assortments with drill bits or screwdriver bits can be your perfect companions. If you drill in closed rooms, suction adapters in connection with all-purpose vacuum cleaners make sense. Special accessories for stirring, grinding, polishing and removal of rust can make the impact drill even more varied than it already is.
Cordless freedom when drilling and impact drilling
The mains-powered impact drivers are legendary. The close relatives with battery operatio can do it as well. Thanks to latest battery pack technologies, our cordless hammer drills have become vital in application areas where there is no power from the wall socket. With an LiHD high-performance battery pack the 18 volt LTX impact drills perform impressive holes up to 18 mm into masonry. When and where you want. Brushless motors and the high-performance impact mechanism make a good job of it, all this independently from the power grid. Every 18 volt battery pack fits in any 18 volt machine. And this since 2009. Now the system is growing again. Also battery packs and cordless machines from the brands of the CAS association can be combined at will within the voltage class. Discover new possibilities: www.cordless-alliance-system.com
Quality for 90 years: The drills from Metabo
Since in 1924 the "Metallbohrdreher" (metal drill) gave the company its name, Metabo has been continuously implementing new standards when it comes to drilling. The high quality standards guarantee optimum work results and precise holes. Every material has different requirements in terms of drill speed, torque, speed and the drill. Metabo offers the right drill including accessories for any challenge. From the small bench tool to the 1,800 Watt three-speed drill Metabo offers a wide range of drills. Metabo also offers a cordless drill, the BE 18 LTX and an air drill DB 10.
The right Metabo drill for any hole
Whether in metal, construction of woodcraft trade, in steel or mechanical engineering or in the metal-processing industry: Any drill from Metabo is perfectly adapted to your requirements. For holes with smaller diameters in wood and metal, the small, light bench drills with 450 Watt are ideally suited. They have an infinite speed regulation to that you can match the speed to any material. The compact drills with 500 and 600 Watt have been developed especially for demanding metal processing in trade and industry. Each of them has an optimal speed range for particular drill diameters in steel. All have an die-cast aluminium gear housing that ideally dissipates the head and is robust at the same time. The BE 500/6, the BE 500/10 and the BE 600/13-2 are equipped with a high-quality Futuro Top keyless chuck from Metabo that automatically retightenes when drilling and thus ensures precise drilling results. Drilling near walls is possible without any problems thanks to the compact design with with small dimension across corners. Metabo drills from 750 Watt to 850 Watt come with different equipment features and can be used for drilling in steel up to 16 mm and in wood up to 50 mm diameter. The 1,300 Watt drill BEV 1300-2 has a two-speed gearbox and constant electronics for constant speeds even under load for particularly fast drilling progress. Further special features of Metabo can be found in the product descriptions.
The specialists among the Metabo drills
In hard-to-reach areas it is often difficult to work with drills. The Metabo angle drill WBE 700 angle drill with 700 Watt can be used here. Thanks to its special design and the robust angular gear it is the expert when it gets too tight for other drills. Another specialist is the three-speed drill B 32/3. It can effect bores into wood up to 70 mm and into steel up to 32 mm diameter. It can also be used in combination with the magnetic drill stand M 100 and thus work like a magnetic core drill.
Comprehensive range of accessories for your Metabo drill
Matching any drill, Metabo offers an extensive range of system accessories, such as different chucks, wood drill bits, metal drill bits, hole saws, angle and torque setting adapters, drill stands, steel wire brushes, all-purpose vacuum cleaners, suction adapters and much more.
Light and powerful: The Metabo impact wrenches
No matter if with cable, cordless or compressed air: If you have to insert a lot of screws or particularly big ones, you are ideally equipped with the impact wrenches from Metabo. Our impact wrenches are light and powerful at the same time. From 100 to 600 Newton metres, from the compact 10.8 volt PowerMaxx to the power pack for large screw anchors up to 12 mm: With our wide range of impact wrenches we offer the perfect solution for any hard application in the workshop, on the construction site or in the industry.
Enormous power, ergonomic packaging - Metabo impact wrenches with cable, cordless or compressed air
With the light and powerful cordless SSD 18 LT and SSW 18 LT impact wrenches you work at a particularly low fatigue level. The brushless SSW 18 LTX 400 BL cordless impact wrench impresses with a unique relation of performance to overall size - despite its high torque of 400 Newton metres it weighs only 1.9 kg and thus is almost as light and compact as an impact wrench in the 200 Newton metre performance segment. For particularly screwdriving applications Metabo offers you extremely powerful impact wrenches with torques of up to 600 Newton metres, both mains-powered (SSW 650) and cordless (SSW 18 LTX 600). The powerful motors with high overload capacity, multifunctional monitoring system as well as high-performance impact features, guarantee an extremely long service life for all our impact wrenches.
Metabo impact wrenches - Fast, low-fatigue and efficient working
By virtue of the operating principle of an impact wrench and the powerful impacts, even particularly jammed screws can be loosened with very low reverse torque and thus with significantly less effort. Thanks to the ergonomic design and the high torque, professionals work with out impact wrenches in a particularly fast and low-fatigue manner. Matching the robust machines, we offer you with bits, socket wrenches and adapters also impact-proof accessories, which is designed for particularly hard applications.
The specialists for drywall construction - with and without cable
The Metabo drywall screwdrivers quickly and powerfully join gypsum plasterboards and gypsum fibreboards on substructures made of wood and metal. The six different models also include three cordless drywall screwdrivers that are operated with an 18 volt battery pack. A mains-powered screwdriver and a cordless screwdriver each are designed for a main application area with a particular ratio of speed and torque. The cordless screwdriver SE 18 LTX 2500 and the related mains-powered screwdriver SE 2500, for example, have a high torque and can handle gypsum plasterboards and gypsum fibreboards on wood or metal substructures very well. The cordless SE 18 LTX 6000 and the SE 6000 with cable are the fast ones with high speed for quick work progress. They are ideal when it mainly comes to gypsum plasterbords on metal u-profiles. The screwdriver models SE 4000 and SE 18 LTX 4000 for universal use have a balanced combination of power and speed and are also suited to fix gypsum plasterboards on metal constructions.
Metabo drywall screwdrivers with sensible details
The drywall screwdrivers from Metabo are useful helpers in interior development when many light gypsum plasterboards or gypsum fibre boards are processed. Thanks to the compact design and their low weight, the special screwdrivers are ideally suited for comfortable one-hand operation. They all have a bit retainer with a 1/4" hexagon recess and are equipped with a magnetic bit holder. The low-noise claw clutch and the very finely adjustable depth guide permit precise and quick working. The depth guide can be removed completely when working "at sight level". The speed can be infinitely adjusted for material-compatible working. The integrated work light for dark corners and a practical belt hook are other sophisticated details for comfortable working in interior development.
With screwdriver magazine for fast driving in of screws in series
All drywall screwdrivers can be equipped with the screwdriver magazine SM 5-55. Standard 50-screw strips in common dimensions can be used. Fast and precise screwdriving in series is very well possible with this robuts magazine attachment. Using such a cordless magazine screwdriver, the gypsum boards are screwed together even faster. The magazine can simply be removed for individual screws.
Discover cordless freedom - now cross-manufacturer!
The three cordless drywall screwdrivers from Metabo can be operated with any 18 volt battery pack from Metabo. Since mainly the compactness and weight are important for these devices, the flat Li-Power battery pack with 2.0 Ah is a good choice. However, even larger 18 V battery packs with higher capacities make sense if particularly long runtimes for plenty of screwdriving cycles are important to you. Maybe you are also using different Metabo battery packs with 18 volt alternately? No problem with 100% compatibility. From now an, the battery packs of other leading brands of the CAS partners can also be used. CAS stands for "Cordless Alliance System", the world's most efficient battery pack system on the market. Discover the large CAS battery pack system: www.cordless-alliance-system.de
Fast and clean processing of edges
Metabo bevelling tools are the ideal solution when it comes to breaking sharp edges, prepare visible edges or carry out a weld seam preparation. The new machines are extremely powerful with a chamfer height of up to 15 mm (at 45°). The Cordless Bevelling Tool KFM 18 LTX 3 RF are also the most powerful 18 Volt battery pack bevelling tool on the market for chamfers of up to 4 mm and radii of up to 3 mm.
The compact bevelling tools
The two compact bevelling tools for 45° chamfers and radii from 2 to 3 mm at visible edges. Whether mains or battery-powered - they are ideally suited for breaking and rounding of drilled and punched edges, chamfering of pipes and the deburring of sheet metal with plenty of contours. High surface quality and precise work results characterise these bevelling tools. During the cutting process uniform surfaces are created without additional rework and perfect radii for optimal preparation of edges for coatings. Filigree deburring of straight sheet metal is also no problem. Straight edges, curves and outer contours from a radius of 13 mm can be processed. Curve or chamfer? The universal cutter head always remains on the machine, only the carbide indexable inserts must be replaced. The cutting depth can be adjusted without tools in 0.1 mm steps thanks to the patented one-touch controller. Integrated stop points support fast operation and protect against unintentional adjustment of the cutting depth while working.
Bevelling tools for weld seam preparation
The three large bevelling tools are opening up a new dimension for productive working, fast work patterns and precise results in the preparation of weld seams. They are suited for all relevant chamfer angles of 0 - 90°. Both flat materials and pipes can be processed. The most powerful metal bevelling tool KFM 16-15 F with 1,600 watt rated input power manages a chamfer height of up to 15 mm at 45°. Metabo bevelling tools permit much more precise working than with an angle grinder. The result are clean, oxide and burr-free surfaces without blue discolouration of the material. This is the ideal weld seam preparation. Chamfer angle and chamfer height are set directly via the guide plates, the cutting depth is set via the one-touch controller without tools in 0.1 mm steps. Thanks to the stop roller, even pipes with an outside curvature from 75 mm can be processed precisely and easily. With these machines you achieve perfect work results in a faster, safer and cheaper way.
Carbide indexable inserts for the bevelling tools
Metabo as system provider offers the matching carbide indexable inserts for the bevelling tools as accessories: Indexable inserts for deburring and rounding for the smaller, more compact bevelling tools and indexable inserts for the weld seam preparation for the larger models. For the cordless bevelling tool that is operated with an 18 volt battery pack, all Li-Power and LiHD 18 volt battery packs from Metabo can be used. You can now also use corresponding battery packs of other leading brands of the CAS partners. CAS "Cordless Alliance System“, the world's most efficient battery pack system on the market. Discover the new dimension of the CAS battery pack system: www.cordless-alliance-system.com
Precise and powerful: The matching saw for any cut
Perfect ergonomics, maximum performance and precise results - these are the characteristics of the Metabo saws. From the compact cordless sabre saw to the site saw we offer professionals everything what they need for cutting and shortening on the construction site or in the workshop.
Metabo saws: Ergonomic design and varied use
With our hand-held saws you are always perfectly equipped for all applications in the workshop and on the construction site. Our jig saws are experts for curved cuts and adaptation cuts. Their slim handle makes them the leader in terms of ergonomics, and high-quality die-cast aluminium components make them particularly robust. The sabre saws from Metabo are extremely versatile and ideal for quick cuts. They reliably cut wood, plastic or metal pipes. The adjustable depth guide protects cables and lines, running behind drywalls in case of installation work. Professionals all over the world also like to use our band, circular and site saws, as they appreciate their great comfort, reliability and precision. Many of our semi-stationary saws can also be folded in a matter of seconds and transported comfortably. Our circular saws also offer a compact and robust design, which, in combination with a guide rail, effect straight and precise cuts in panel material, but effect also crosscuts in a quick and reliable manner. The varied KSE 55 Vario Plus unites the functions of a plunge-type circular saw and the ones of a circular saw in only one machine and thus offers maximum flexibility in all application areas.
Always mobile with the Metabo cordless saws
With our cordless jig saws, cordless circular saws, cordless sabre saws and cordless crosscut and mitre saws, there are no spatial limits for you on the construction site or in the workshop. You avoid tripping hazards and time-consuming switching of cables.
The patented Metabo Ultra-M technology makes our cordless saws enduring and powerful. Three years warranty on battery packs and charger are included. Additionally, Metabo offers a comprehensive range of consumables. For example, you can select from more than 80 jig saw blades, to achieve optimum results. Our vacuum cleaners and chip extraction systems collect dust and chips already when they are generated, thus keeping the work environment clean and protect your health. Whether in the workshop or on the construction site: With our complete solutions from saws, accessories and extraction solution you make perfect cuts, always and everywhere.
The handy Metabo jigsaws for precise curved cuts
Round, arched and curvaceous cutting lines are the special field of the jigsaws. Tight radii and cutouts from a surface are also no problems for the manoeuvrable power tools. Metabo jigsaws have a variable stroke rate for material-matched sawing into wood, plastic, aluminium or thin sheets. The selectable pendulum stroke ensures optimal chip ejection and fast sawing progress especially when sawing wood. A chip blowing function permits clear view of the cutting line for precise sawing after initial cut. All Metabo jigsaws can be rotated by 45 degrees in both directions for bevel cuts. If the saw blade needs to be changed, this can be done quickly and without complications thanks to the tool-free quick change system "Metabo Quick". Metabo jigsaws are available with bow type handle and also with a handle area at the slim motor housing. The user can choose which shape he prefers. In both designs the handle area is equipped with a soft-grip surface for comfortable and safe guiding of the jigsaw in any application.
The 750 Watt jigsaws with constant speed when sawing
A total of four jigsaws have a rated input power of 750 Watt and manage impressive cuts in wood up to a material thickness of 140 mm. In NF metals the maximum cutting depth is 35 mm and in sheet steel 10 mm. The powerful cutting performance of this powerful jigsaws is also possible thanks to the VTC electronics for constant speeds under load. The top models STE 140 Plus and the STEB 140 Plus with bow-type handle have an additional auto start with stroke acceleration for easy sawing and a motion-activated LED work light for bright illumination of the cutting line. The restart protection prevents unintentional startup after a power cut for the user's safety.
Cordless jigsaws for the cordless construction site
The cordless jigsaws from Metabo are operated with an 18 Volt battery pack and impress, like their mains-powered colleagues, with powerful cutting output. The cordless jigsaw STA 18 LTX 140 also manages a cutting depth of 140 mm in wood and is equipped with VTC electronics as well as soft auto start. The best runstimes with maximum performance is achieved by a Metabo cordless jigsaw with an LiHD battery pack with high-performance cells, but also all other 18 Volt battery packs from Metabo or other leading brands of the CAS partners can be used. CAS stands for "Cordless Alliance System", the world's most powerful battery pack system on the market. Discover the large CAS battery pack system: www.cordless-alliance-system.de
The Metabo jigsaw system for best results
With what are you able to achive top performance with a Metabo jigsaw? For example with high-quality saw blades from Metabo. The saw blade range covers all important applications areas of a jigsaw: for wood, metal and special applications there are numerous blades in different versions available. Cleverly compiled assortments round off the saw blade range. For circular cuts and precise parallel sawing we recommend using a circle-cutting and parallel guide. The Metabo all-purpose vacuum cleaner is very well suited for the effective chip extraction while sawing in closed rooms. All system components around the Metabo jigsaw are perfectly matched and cooperate in a precise and efficient manner.
Robust mitre saws for construction site and workshop
Mitre saws from Metabo carry decades of experience in them. The range comprises over 10 saws for different challenges. The rated input power varies for the models from 1350 watt to 2200 watt. Saw blade diameters can be selected from 216 mm to 315 mm, the maximum width and height of the workpiece depends on this. The large crosscut and mitre saw KGS 315 Plus manages an impressive cutting width of 320 mm with a cutting depth of 120 mm if the saw blade is at 90°. Obviously the sliding function integrated in all mitre saw models is used here. For mobile use we recommend the compact lightweights with carry handle that weigh barely more than 10 kilos. Unique is the KGSV 72 Xact SYM mitre saw, a combination of panel and skirting saw with symmetrically adjustable stop system. A real progress for the floorer for time-saving, precise sawing.
Functions for maximum sawing comfort
The turntable can be turned on both sides for all mitre saws. However, even the pitch of the saw head is standard, for some types even to the right and left. Mitre cuts, bevel cuts and rafter cuts are possible without problems. If you have a mitre saw with speed regulation, you can also saw in aluminium and plastic without any problems with adapted speeds. The integrated laser for cutting guidance and the extendable table width extensions are standard at metabo, just as the option to extract chips. Please refer to the individual products for further product features.
Large range of saw blades for mitre saws
From rough cuts in construction wood to precise, clean cuts in demanding workpieces, saw blades are available in all required diameters and teeth. Special blades for plastic and aluminium round off the extensive range of accessories for mitre saws. Stands can be used for sawing while standing up. Light and robust, partly equipped with trolley function for mobile use, they are loyal helpers also on the construction site. When sawing long workpieces, the support surfaces can be extended up to a width of 4 metres for the mitre saw stand KSU 401.
The cordless construction site with cordless mitre saws
Also cordless mitre saws are powerful tools thanks to modern battery pack technology that are mainly used to construction sites or during fitting and laying jobs. With an LiHD high-performance battery pack (8 Ah), for example, up to 340 cuts in soft wood 60 x 60 mm are possible with a single battery pack charge. You can use any battery pack with 18 volt from Metabo in our battery pack system for all 18 volt tools. Even battery packs from other brands from the CAS partner association can be used. Discover now at www.cordless-alliance-system.com
Cut perfect slits with the Metabo wall chasers
The wall chaser is the ideal power tool, when it comes to laying cables, water lines and pipes. Slits are cut into the wall, since they accommodate installations. A wall chaser is normally operated with two diamond discs that are mounted at a custom distance. The cutting depth can be freely set within a defined range. Using the wall chaser two parallel slits are cut. The remaining centre bar is removed with hammer and breaking tool - or more comfortably with an electric chipping hammer - et voilà, you have the requested groove for the subsequent laying work.
The ideal wall chaser for electrical installations
The MFE 40 wall chaser for diamond cutting discs with a diameter of 125 mm cuts slits up to a groove width of up to 35 mm by using the supplied spacer rings. The cutting depth can be freely selected from 10 to 40 mm. The wall chaser is equipped with a 1,900 watt powerful motor, constant speeds and a two-speed high-performance gear for fast work progress. With the innovative diamond cutting discs, wall grooves can be created in one work step with the MFE 40. This is a great time saving since there is no removal of the centre bar when using these special discs. Another advantage of this wall chaser is the robust die-cast aluminium hood with rubber rolls and optimal handle position for comfortable guiding of the machine. Thanks to sliding cut, optimal view of the marking line is always given. You stay safe while working, among others thanks to the Metabo S-automatic safety clutch that immediately decouples the drive mechanically when the disc jams. The so-called kickback, the reverse torque of the machine on the user, it thus reduced extremely.
Slits up to 65 mm depth for water lines and pipes
The large 2,400 watt wall chaser MFE 65 can chase wall grooves up to 41 mm width and a depth of maximum 65 mm. This makes it ideal for laying sanitary installations such as water lines and tubes under plaster. It works with two diamond cutting discs with a diameter of 230 mm. An electronic safety shutdown protects the user when working if a disc gets stuck in the material. The Metabo VibraTech (MVT) dampening system ensures minimal vibrations when cutting. All Metabo wall chasers are equipped with an electronic soft start and an integrated restart protection after a power cut. For safe working with maximum user safety.
Metabo accessories for wall chasers for best work results
Metabo has a wide range of diamond cutting discs for wall chasers. Discs for different building materials with different cutting characteristics are available in diameters 125 mm and 230 mm. A special feature at Metabo are the diamond cutting discs for wall slits with 20 or alternatively 30 mm width in one work step. They have a diameter of 125 mm and can be used in connection with the wall chaser MFE 40. They offer usrs a great time saving since there is no removal of the centre bar. For particularly low-dust working, a Metabo all-purpose vacuum cleaner can be connected to the Metabo wall chasers. Matching hoses and connection adapters can also be found in the Metabo range of accessories.
Metabo Orbital Sanders: quiet operation, perfect grinding result
Using Metabo orbital sanders you will always achieve a clean, grinding result without scoring marks and grooves, for example, when sanding varnished and wooden surfaces of door frames, staircases or flat workpieces. The innovative oscillating system and the smooth operation guarantee an excellent finished result. Even heat-sensitive materials such as varnish can be processed with the Metabo sanders thanks to the preselection of the orbital frequencies.
The large orbital sander with Turbo boost for maximum material removal
The SRE 4351 TurboTec orbital sander is the largest one among the Metabo orbital sanders. With a rated input power of 350 watt and a sanding pad for hook and loop sanding sheets 115 x 230 mm it tackles the material. All this with smooth running operation and minimal vibrations thanks to the new innovative oscillating system. The side handle offers additional dampening for comfortable guiding of the sander in any position. The integrated Turbo boost releases additional power reserves for maximum material removal at the touch of a button. The sanding pad has additional lateral extraction channels and permits a particularly efficient grinding dust extraction for clean working.
Further characteristics for comfortable sanding
Almost all sanders, except for the light compact palm grip orbital sander, offer a regulation of the orbital frequencies for sanding according to the material. Thanks to its compactness it is ideal for sanding overhead. All sanders have large gripping surfaces with a comfortable soft-grip surface for comfortable and safe guiding of the grinders. They are equipped with a hook and loop sanding pad and a clamping system so that both hook and look sanding sheets and sanding sheets for clamping can be used. Obviously, all Metabo sanders have an integrated dust extraction and are equipped with a dust collector cartridge or dust bag. Even more efficient, however, is the connection of a vacuum cleaner for particularly low-dust working. Metabo all-purpose vacuum cleaners are ideally suited for this and recommended as ideal system solution.
Hook and loop sanding sheets and sanding sheets for clamping
Metabo has a large selection of sanding sheets on offer. Sanding sheets in grits P40 to P240 for wood and metal are offered for all relevant dimensions and perforations. There are also some assortments with different grits. For grinding of paints and lacquers there is a complete range of hook and loop sanding sheets up to grit P320. Nylon webs for spot grinding, roughening and matting as well as abrasive meshes for grinding gypsum and gypsum carton round off the Metabo range of accessories for orbital sanders.
Metabo's Band Saws: Non-stop Precision
Clean cuts, precise working, stable design - these are the features that characterise a band saw from Metabo. The special feature is in the detail: For optimal guidance and service life of the band saw blade, all our band saws have a precision three-pulley guide. The low-vibration grey-cast tables ensure a clean cutting result and the precise parallel guide/rip fence with precise reading scale for the required precision. By changing over the V-belt position in the lower roller box, you can preset two different speeds depending on the material.
Comfortable and safe sawing with the band saws from Metabo
The BAS 317 precision models achieve a cutting height of 165 millimetres, the passage width is 305 millimetes. With a rated input power of 900 Watt, you work with a maximum cutting speed of 800 metres per minute using the band saw. The angle of the saw table can be adjusted comfortably from -2 degress to +45 degrees. Using the stand, you can increase the working height of the band saw from 510 to 985 millimetres. For particularly powerful sawing with a cutting height of 280 millimetres, the band saws BAS 505 Precision provide cutting speeds of maximum 965 metres per minute with a rated input power of up to 1,900 Watt. A restart protection in all band saws prevents that the band saw starts up unintentionally after a power cut. If a sawing door is opened, the safey end switch switches off the band saw immediately.
Scope of delivery and accessories for the Metabo band saws
The band saw's scope of delivery includes an A6 universal saw band blade and a parallel guide/rip fence. Depending on the band saw, there is also a mitre fence, a suction adapter or extraction nozzle and the BAS 317 Precision also comes with a stand. In addition, Metabo also offers a folding work table apart from different band saw blades, a wheel set for easy transport and a circle cutting attachment for circular or conical cuts.
Robust sabre saws for diverse, powerful sawing
Hardly any tool is as versatile as a sabre saw that is also called reciprocating saw. In the building trade and in renovation it is the first choice for coarse cuts, for example for shortening pipes, for cutting wood and insulation boards, shortening of porous concrete blocks and much more. Using the 1,400 Watt powerful sabre saw SSEP 1400 MVT and the smaller model SSE 1100, Metabo offers two particularly robust and powerful sabre saws with a 4 metre long cable. For the cordless construction site you can choose from three models with battery operation: Two particularly compact, handy sabre saws with different battery pack voltages and a large battery pack sabre saw, the ASE 18 LTX that belongs to Metabo's large 18 Volt cordless family.
Metabo sabre saws impress with intelligent details
What is the special feature of Metabo sabre saws? The details. Every model is built in such a way that the user can expect best work comfort. All sabre saws have the lowest possible weight and an attractive an above all ergonomically optimal design. The aluminium gear housing of the large sabre saws is coated with plastic and the handle is equipped with a soft-grip surface for comfortable and safe handling in any working position. The tool-free saw blade change Metabo Quick is standard for all sabre saws. The saw blade can be replaced in a matter of seconds. The depth guide can be adjusted to optimally use the saw blades and permits varied applications, such as plunge cuts. Powerful motors ensure powerful strokes and thus quick work progress. The saw blade of all Metabo sabre saws can be rotated by 180° for comfortable working over head.
Cordless sabre saws for use without mains power
When you need to saw indepdendently from mains power, use cordless sabre saws from Metabo. The two cordless sabre saws are particularly light and compact and therefore also ideally suited for one-hand operation. They render good service even in hard-to-reach areas thanks to their compact design. An integrated LED work light also provides light for any cutting location. A particularly smart detail gives this model an extended range of application: The unique Quick-retainer permits the use of sabre saw blades and jigsaw blades. The large cordless sabre saw ASE 18 LTX, just like the smaller SSE 18 LTX Compact, belongs to the 18-Volt class. They can be operated with any 18 Volt battery pack from Metabo or with brands from a CAS partner. CAS stands for "Cordless Alliance System“, the world's most efficient battery pack system on the market. Discover the large CAS battery pack system: www.cordless-alliance-system.de
Metabo sabre saw blades for any area of application
The best sabre saw saws only as well as the saw blade used is able to. Therefore you should also watch out for good quality here. Sabre saw blades from Metabo are ideally matched to the respective application areas so that perfect sawing results can be achieved. The saw blade range comprises over 50 different sabre saw blades and covers all relevant application areas. It is divided into different series for the different requirement profiles. Apart from saw blades for wood and metal, special blades for sawing insulation materials, gypsum plaster, porous concrete and much more are included in the Metabo accessories' section for sabre saws.
Metabo table saws - ideal for workshop and construction site
Metabo offers nine table saws with three different saw blade dimensions: 216 mm, 254 mm and 315 mm. This is also embedded in the type designation for reasons of orientation when choosing a machine. If low weight and compact design are important to you, the models with 216 and 254 in their name are right for you. The lightest saw in the programme is the TS 215 Floor. With a bit more than 20 kg it is suited for single-handed transport and designed for floor installation work. Other table saws in this class are equipped with a trolley function and are available both as mains-powered saws and cordless table saws. The larger table saws with a 315 saw blade are a good choice for particularly power-intensive sawing applications.
The compact table saws with trolley function for on the go
These Metabo table saws with integrated stand are set up and disassembled very easily and in a matter of seconds. Core piece of our patented mobilty concept is the stand that is completely integrated in the housing and the comfortable trolley function. Thanks to this design these table saws are very compact and can be easily transported and stored in a space-saving manner. Thanks to the robust hard rubber tyres the saws can be pulled comfortably to their deployment location. Whether in the workshop or on the construction site: The table saws TS 216 and TS 254 set the standard for mobility for mains-powered table saws. The two cordless table saws offer the same comfort. Depending on the model, they are operated either with two 18 Volt battery packs (TS 36-18 LTX BL 254) or with one 36 Volt battery pack (TS 26 LTX BL 254). A powerful brushless motor ensures powerful sawing independent from mains power. The integrated dust extraction with dust cyclone permits low-dust sawing also without vacuum cleaner. For maximum freedom on the construction site with the cordless table saws from Metabo.
Powerful and robust table saws for any application
Universal table saws for powerful sawing of square timbers, boards, plates and wood-like materials are indispensable in the workshop and on the construction site. With the table saws TKHS 315 C and TKHS 315 M, Metabo offers robust and reliable saws with plenty of power. Every detail is well thought out, starting from the stepless adjustment of the saw blade to the maintenance-free, quiet induction motor. Both table saws are also offered with a high torque three-phase motor as an alternative to the alternate current motor. The C-models have a universal stop included in the scope of delivery: The M-models are equipped with parallel guide/rip fence and mitre fence as standard, and, thanks to the table length extension, also large workpieces up to a cross section of 340 mm x 85 mm can be sawn. All Metabo table saws are delivered with a saw blade to that you can start right away.
Metabo circular saw blades for any requirement
The table saw only has one aim: To get the saw blade quickly and precisely through the workpiece. Therefore, choosing a good saw blade is decisive for an optimum work result. The best saw works only as well as the saw blade permits. Metabo has a saw blade range that meets different requirements. For coarse, fast cuts there is the "power cut" series. Clean, precise cuts in wood and composite materials can be achived with the "precision cut" series. The "multi cut" saw blades are ideal for universal use in demanding materials such as laminate, plastic or aluminium profiles. Metabo circular saw blades are obviously also available for circular saws, mitre saws, site saws and pull saws.
Powerful Metabo circular saws for precise cuts
Circular saws from Metabo are used wherever straight cuts in massive wood or panel material are required. Powerful motors between 1,200 Watt and 1,800 Watt ensure powerful sawing output and fast work progress. The cutting depth can be inifitely adjusted from 0 millimetres to the maximum cutting depth that is for a non-inclinde saw blade, depending on the model, between 55 and 68 millimetres. Particularly light and compact are the 1,200 Watt circular saw KS 55 and the KS 55 FS that can be used directly in guide rails from Metabo or other manufacturers. The are fitted with a 160 mm saw blade and are ideal for universal construction site use. The most powerful saw is the KSE 68 Plus with a 1,800 Watt motor that is equipped with overload protection. It has a maximum cutting depth of 68 milllimetres and an adjustable speed for material-matched sawing. A Metabo all-purpose vacuum cleaner for the external chip extraction can be connected to all Metabo circular saws. A perfect combination for health-friendly working and a clean workplace.
The cordless circular saw for universal use on construction sites
Metabo offers a compact cordless circular saw for sawing independent from the mains. The KS 18 LTX 57 is operated with an 18 Volt battery pack. Ideal for the powerful cordless saw are te LiHD battery packs with high-performance cells, however any other Metabo battery pack with 18 Volt can be used. Within the large 18 Volt class, Metabo guarantees 100% compatibility between machine, battery pack and charger. Also battery packs of other leading brands of the CAS partners can be used. CAS stands for "Cordless Alliance System“, the world's most efficient battery pack system on the market. Discover the large CAS battery pack system: www.cordless-alliance-system.de
Circular saw and plunge-cut saw in one machine
A plunge-cut saw permits the user to directly plunge into the workpiece with the saw blade. The plunge function is ideal for sawing of cutouts for example for sinks or ventilation shafts. The plunge cut circular saw KSE 55 Vario Plus unites the full-featured functions of a plunge cut sw and a circular saw in one machine. It is also ideal for cuts near the wall. The speed is variable and permits material-matched sawing in different materials. Also under load the speed remains constant and ensures fast work progress.
Guide rails, saw blades and more
For particularly precise and straight cuts, the circular saws are put on the Metabo guide rails FS that are available in 4 lengths. The smallest FS 80 is 80 centimetres long, the longest FS 310 measures an impressive 310 centimetres. The gudie rails have a splinter protection for low-tear sawing and a cling-fit surface for safe hold on the workpiece. The large Metabo saw blade programme offers high-quality circular saw blades with different application profiles. From rough cutting of construction timber to precise cuts in laminate or veneered chipboards - there is a matching saw blade for any application area in the relevant diameters. Metabo saw blades are particularly durable and are characterised by a long tool life.
The semi-stationary machines from Metabo permit powerful sawing, planing and grinding
With more than 30 years of experience in semi-stationary wood processing, Metabo
offers wood professionals a large selection of semi-stationary machines. No matter if it is about sawing, planing or grinding: With our semi-stationary power tools you work in a particularly fast, precise and safe manner. Our products combine efficiency and precision with great robustness and a long service life. Our extensive range of accessories and matching extraction solutions offer you the optimal complete solution for any requirements.
Our semi-stationary machines ensure high mobility and precise sawing
Our range of semi-stationary saws extends from compact and mobile mitre saws,
table saws, pull saws and band saws to our extremely powerful site saws. The M-class crosscut and mitre saws are real lightweights and are always ready for a change in location thanks to their compact dimensions and the ergonomic carry handle. Our cordless mitre saws can be flexibly used thanks to the powerful and enduring lithium-ion battery packs, achieve a high number of cuts per battery pack charge and are in no way inferior to their mains-powered counterparts in terms of performance. With our KS and KGS-Plus models we offer you particularly powerful and versatile mitre saws for precise cuts. The Metabo circular saws always keep you a cut above the rest: The patented Metabo technology in our mobile models TS 254 and TS 216 permit a quick change of location thanks to a cleverly designed stand with integrated wheels.
They are designed for demanding conditions on the construction site - the semi-stationary machines from Metabo
With our band saws we offer you machines with maximum stability and precision for accurate curved cuts. Precise and safe cross cuts also for longer materials are easily carried out with our pull saws. Professionals use Metabo's site saws for the really tough jobs - the robust machines are universal talents for demanding task on the construction site. Our planer thicknessers help you to perfectly shape your timber and beams. We offer an extensive range of system accessories and consumables for all semi-stationary machines with the help of which you can achieve perfect results in a fast and efficient manner. Our matching vacuum cleaners and chip and dust extraction units keep the workshop and construction site clean and protect the user's health.
We also have the right semi-stationary power tools on offer for metal processing:
With our metal chop saws you cut profiles, pipes and rods made from steel, cast iron, aluminium or other NF metals in a fast and powerful manner. The Metabo bench grinders are the optimal tool for your tool: No matter if you need to resharpen a chisel, scraper blades or planer blades - with our bench grinders we offer you the right model for any job.
Reliable pumping empty, recirculation, pumping - with the durable water and pump systems from Metabo
You would like to pump sandy or sludgy water from construction pits, pumping dry flooded cellars, pump well water for garden irrigation, use rain water in the househols or simply recirculate pool water? With our extensive pump technology we offer you the right system including accessories for all applications. Metabo pumps are designed for safety and long service life: They are made from robust stainless steel or grey cast and have particularly high-quality mechanical seal systems. With the unique XXL warranty you are always on the safe side when it comes to service of all water and pump systems from Metabo.
Metabo pumps for drainage and irrigation
We provide you with proven pump technology for any application: Our site and sewage water pumps continue where others stop. Even stongly contaminated sewage water with particles of up to 50 millimetre in diameter are pumped reliably in quantities of up to 28,000 litres per hour. Our clear water submersible pumps are real helpers in need: No matter if there heavy rain flooded the cellar or a washing machine leaked - the Metabo machines reliably, quickly and automatically pump out the waste water to a residual water level of only two to three millimetres that can be wiped dry. Our combi submersible pumps are particularly versatile, since they can be used both for clear and dirty water, and in manual mode they can be used in low-intake mode down to a water level of only one millimetre.
Apart from the Metabo pumps for drainage you can completely rely on Metabo's pump technology when it comes to irrigation and water supply. Our robust garden pumps, deep well pumps and submersible pressure pumps allow you to pump ground water or irrigate your garden with rain water - like this you save drinking water and protect the environment. The powerful pumps with their multi-level pump running gear pump service water from the well and up to a height of 60 metres. Made from high-quality materials, the pumps from Metabo are low-maintenance and particularly durable also in continuous mode.
Pumps from Metabo: Reliable water supply for house and garden
With our domestic water works you supply your WC flushing, the washing machine and other domestic appliances in an automatic and environmentally-friendly manner with free rain or well water. In their robust tank the machines always store a water supply of up to 100 litres. The Metabo pump protection with its dry-run protection offers maximum safety for user and machine. Filter and check valve are integrated from the start in the compact design of our complete systems. Our automatic domestic water systems are particularly intelligend and economical: The automatically pump the required water quantity as soon as a connected water tap is opened or a domestic appliance is switched on. Our robust garden pumps, deep well pumps and submersible pressure pumps allow you to pump ground water or irrigate your garden with rain water - like this you save drinking water and protect the environment. The powerful pumps with their multi-level pump running gear pump service water from the well and up to a height of 60 metres.
Metabo drainage pumps for any application
Pump sandy or muddy water from construction pits, pump dry flooded cellars, drain shafts, pump empty ponds or pools or as active flood protection. Metabo offers for all drainage jobs the right pump system including accessories. Metabo pumps are designed for safety and long service life. They are made from impact-proof plastic, robust stainless steel or grey cast iron and have particularly high-quality sealing systems. With the unique XXL warranty you always play it safe with all water and pump systems from Metabo.
Metabo construction and dirty water pumps, the specialists when it the going gets tough
The powerful Metabo construction and dirty water submersible pumps continue where others stop. Whether you have to pump emtpy and drain construction pits with sandy or muddy construction site water, rain water or groundwater, this makes no difference for our particularly powerful models: the pump quantities of 7,500 to 28,000 litres per hour, even very dirty waste water with dirt particles of up to 50 millimeters diameter (dirty water pump SP 28-50 S Inox). Self-cleaning robust impellers with particularly quiet operation, an integrated overload protection and durable sealing systems ensure absolute reliability. The Metabo dirty water pumps SP 24-46 SG and SP 28-50 S Inox, as well as the Metabo drainage pumps, DP 18-5 SA and DP 28-10 S Inox can thus be used for a variety of applications. Obviously they are also suited for automatic mode and continuous mode. Special applications such as pumping empty of cellars or pumpy dry of construction pits can be done in no time at all with these robust pumps.
Metabo combi submersible pumps for versatile use
The combi submersible pumps from Metabo are real multi-talents that can be used both for clear water and for dirty water. Even dirt particles up to a grain size of 30 millimetres are no problem for the combi submersible pump TPS 16000 S Combi. The two Metabo combi submersible pumps unite three different applications in one compact tool. In automatic mode with float switch the Metabo combi submersible pumps can be used as drainage pump for both clear and dirty water. In manual mode it can be used for low-intake down to a water level of only one millimetre residual water. The special flexibility of the combi submersible pumps is shown in the easy and comfortable change between the different applications by setting the pump foot to the respective function.
Ideally equipped for an emergency with Metabo clear water submersible pumps
Metabo clear water submersible pumps are real helpers in an emergency: Whether high water after a strong rainfall has floode he cellar or a defective washing machine has leaked, the Metabo devices pump out the cellar reliably, quickly and automatically. The low-intake clear water submersible pumps TPF 6600 SN and TPF 7000 S pump up to a residual water level of two to three millimteres that can be wiped dry. These pumps can also be used for garden irrigation directly from water reservoirs. The robust housing is made from impact-proof plastic or stainless steel and the integrated overload protection lend the Metabo clear water submersible pumps a particularly long service life.
Among the accessories for water and pump technology you will find various adapter, connections, hoses and sets. Many other pumps for irrigation and for domestic water supply are included in the Metabo range of pumps.
Metabo irrigation pumps - robust and powerful.
With the robust garden pumps, deep well pumps and submersible pressure pumps from Metabo you can for example pump ground water or irrigate your garden with rain water - thus saving 50% of drinking water, wich protects the environment and saves you money. The powerful devices pump service water from the well up to a height of 60 metres. Made from high-quality materials, the pumps are particularly robust and durable.
Let the summer begin with Metabo garden pumps
Garden pumps are desigend for groundwater pumping and garden irrigation. Especiallyat the height of summer garden irrigation can be a full day job. You should consider using a Metabo garden pump to make life easier when watering your garden. Irrigation becomes comfortable and saves time. Depending on the model, up to 6 consumers (garden pump P 9000 G) can be connected. These could be both showers and sprinklers for irrigation. Decisive for the number of consumers is the largest possible delivery rate and the maximum pressure of the respective pump. All garden pumps have a maintenance-free capacitor motor with overload protection. The garden pump P 6000 Inox is additionally equipped with an automatic dry-run protection and its operation is particularly quiet despite the high power.
The submersible pressure pump for deep sources
The Metabo submersible pressure pump TDP 7501 S can be used for direct operation of irrigation systems and for garden irrigation from deep sources, cisterns or wells. The 3-level pump running gear ensures optimal pressure buildup depending on the application. Thanks to adjustable float switch this pump is also ideally suited for automatic operation. The integrated check valve reliably prevents the running dry of the water line. The durable motor has an integrated overload protection to protect from overheating.
Metabo deep well pumps for maximum delivery output
These Metabo pumps are constructed especially to pump water from great depths such as bore wells or shafts. You can reuse available water to irrigate your water at the same time and to do something good for the environment. The Metabo deep well pumps can submerse up to 20 metres and manage an impressive delivery height of 55 to 60 metres (depending on the model). The deep well pump TBP 4000 M has a 7-level , the TBP 5000 M even an 8-level pump running gear that permits this enormous delivery output. All jobs in the area of garden irrigation and groundwater pumping, as well as the pumping, pumping out, pumping empty and circulation of clear water is no problem for these powerful generalists.
The Metabo pump range offers many more pumps for drainage and for the domestic water supply.
Domestic water supply with Metabo - reliable and safe
Domestic waterworks and automatic domestic water systems from Metabo are ideal for automatic domestic water supply. Both device types supply water for house and garden depending on the demand. The domestic waterwork has its own robust steel tank where permanently smaller to medium-sized quantities of 25 to 100 litres (depending on model) of water are stored under pressure. The automatic domestic water system on the other hand supplies the service water directly from the source, the well or the cistern. Both the domestic waterwork and the automatic domestic water systems from Metabo have a maintenance-free capacitor motor with overload protection and are equipped with a high-quality mechanical seal system. Clever details for a long service life of the Metabo domestic waterworks and automatic domestic water systems. Apart from the water supply, these devices can also be used to increae or maintain the pressure in the water supply system. Other application areas are garden irrigation and groundwater pumping. The domestic water supply pumps from Metabo are real all-rounders.
The domestic waterworks - an environmentally-friendly water supplier
With domestic waterworks from Metabo you supply your WC flushing, the washing machine and other household appliances automatically and in an environmentally-friendly way with free rain or well water. These devices always hold a water supply of up to 100 litres (domesit waterwork HWW 9000/100 G) in their robust tanks. This permits particularly low-noise and energy-saving supply of service water. For larger water quantities the pump of the waterwork is activated automatically to cover additional demand. Most domestic waterworks are equipped with the Metabo pump protection. This automatic dry-run protection offers maximum safety for man and machine. Both complete systems HWWI 3500/25 Inox and HWWI 4500/25 Inox have filters and check valves integrated from the start in their compact design and can thus be taken into operation very quickly.
The automatic domestic water system for water supply and irrigation
Metabo automatic domestic water systems are particularly intelligent and energy-saving: They automatically pump the required water quantity when a connected water tap is opened or an appliance is switched on. The automatic domestic water system equipped with a dry-run protection are also suited for garden irrigation, for circulation and pumping out. Three models with different delivery output of 3,500 l/h to 6,000 l/h are available. The HWA 6000 Inox that is equipped with a mutli-level pump running gear has the highest output. For example, up to 4 sprinklers for garden irrigation can be connected to it. The automatic domestic water system HWAI 4500 Inox is a complete system where the filter and check valve are already integrated. This makes installation fast and easy.
No matter how you decide, whether domestic waterworks or automatic domestic water system, with solutions from Metabo for the water supply in house and garden you play it safe.
In the accessories for water and pump technology section you will find numerous adapter, connections, hoses and sets.
Other pumps for drainage of cellars or construction pits and for irrigation as well as groundwater pumping are included in the Metabo pump range.
The domestic water works from Metabo: High performance and long service life
The domestic water works from Metabo are ideally suited for the automatic water supply of washing machines, dishwashers and toilet flushing systems, for garden irrigation and groundwater pumping. The domestic water is ideal for pumping, pumping dry and circulation of clear water. The domestic water work is equipped against heat and old: The thermal motor protection ensures that the maintenance-free capacitor motor does not overheat, the water drain plug protects from frost. Metabo's domestic water work has a particularly long service life thanks to the high-quality slip seal systems.
Pump up to 9,000 litres per hour to up to 55 metres height with the domestic water works from Metabo
With 3,300 to 9,000 litres delivery rate per hour you can automatically supply your household with water up to 45 or 55 metres of height - depending on the domestic water work model. The manometer and pressure switch are integrated in a space saving manner and stored safely in a box at the flange in all domestic water works. Except for the domestic water work HWW 6000/50 Inox with its 50 litre steel tank, the HWW 900/100 G with 100 litres and the HWW 4500/25 Inox Plus, the 24 litre tank of which is made of stainless steel, the new domestic water works all have a 24 litre steel tank. For easy installation and commissioning, Metabo offers with the domestic water work HWWI 3500/25 Inox and the HWWI 4500/25 Inox complete systems, which also have an integrated filter and return valve in the compact device, apart from the pump protection. The washable filter protects the domestic water work from contamination and the return valve prevents the pump from running dry when switched off. It also ensures a short restart time.
Full range: Our compressed air machines deliver professional competence to the professional
With 18 compressors and more than 60 tools, Metabo offers professionals in different industries compressed air system solutions for numerous applications. We are the only power tool manufacturer to offer a complete compressed air system for craftsmen. With our robust, powerful and reliable machines you are ideally equipped for any application - from the generation of compressed air and the preparation and distribution to compressed air tools. In addition we offer a comprehensive range of accessories and a reliable service including service and repair.
Modern compressed air technology in action-The Metabo compressed air machines
No matter if on the construction site or in the workshop: Our three compressor classes can handle any task. The light and compact starter models of the "Basic Class" are suited for simple commercial applications. On the construction site, our "Power Class" machines provide top performance with maximum mobility. Since the pumps do neither require lubrication nor oil, the power compressors can be transported in all positions. Thanks to the low weight, the compact design and the balanced handle position they can be transported to the work site very easily without requiring much effort. Our "Mega Class" compressors are real power packs for demanding applications in the workshop. Particularly powerful, driven by V-belt and stable, they do not leave any wishes unfulfilled when it comes to uncompromising power. No matter for what compressor you decide: At Metabo you do not get any hot air, but high-quality machines. Our 10-year tank warranty against rusting vouches for this.
The compressed air machines are ergonomical and mobile tools
Professionals on the construction site and in the workshop require powerful tools that can be used flexibly. Our range of compressed air tools fulfills this criteria and ranges from the angle grinder to the drill to staplers and paint spray guns. High-quality materials make the Metabo compressed air tools particularly robust and durable. At the same time, our machines are suited for work at hard to reach places thanks to their compactness. The compressed air angle grinder DW 125 Quick weighs for example only two kilogrammes, has, however, a high performance and different comfort functions. Varnish professionals value our paint spray guns with the stepless fine regulation of air volume and work material as well as the flowing change from round to wide jet. This makes precise working even easier. Obviously, we also supply matching nozzle kits and other accessories for every paint spray gun.
Compressed air solutions for professionals: The compressors from Metabo
With various compressors of the basic, power and mega class, Metabo has a wide range of machines for generating compressed air. With this we offer the ideal solution for any application area. A wide range of accessory parts and compressed air tools also makes Metabo the only power tool manufacturer offering a complete compressed air system under one brand.
Our compressors are powerful in all areas
Professionals from different industries find modern compressed air technology for their area at Metabo. High-quality materials and perfectly synchronised components make our devices robust and reliable. The entry-level models of the basic class are suited mainly for simple commercial applications. They are particularly compact and therefore light and nimble when used. The machines of the power class are ideally equipped for applications in interior development and on the construction site. They are handy and mobile and deliver reliably compressed air for many professional applications. The instrument panels can be easily read and have, for example, a manometer for the vessel and working pressure. Particularly demanding compressed air tasks in the workshop are best handled with the compressors of Metabo's mega class. The extremely powerful compressors deliver large amounts of compressed air and are very robust. The V-belt drive with low speed gives an especially long service life to the compressors.
Power class: Oil-free and low-noise compressors
The models of the power class have tanks with a volume from five to 20 litres and are all oil-free. Since the 1.1 to 1.7 kW powerful pumps do not have to be lubricated, the compressors can be transported in any position. Moreover, the Power 400-20 W OF offers a very quiet operation and is particularly suited for continuous use in closed rooms or inhabited buildings.
No matter what compressor you settle for: At Metabo you don't get any hot air, but high-quality, powerful and durable devices. This is also guaranteed by our tank warranty against rusting, which covers 10 years. With an additional range of more than 60 compressed air tools and matching accessories for the preparation and distribution of compressed air, Metabo offers professionals an extensive range of compressed air products for numerous applications.
Clean air - clean work: Metabo's extraction systems
Drilling, sawing, grinding or milling generates dust and chips. To protect your health and keep your work environment clean, Metabo offers a wide range of suction and extraction systems including matching accessories. We provide you with the optimal extraction solution for your application area.
Healthy and safe working thanks to our extraction service
No matter if there is slightly hazardous dust such as house or gypsum dust (dust class L), medium hazardous dust from filler, concrete and wood (dust class M) or highly hazardous particles such as mould and glass wool (dust class H) - with Metabo you extract such dusts in an easy and reliable manner. Our robust and powerful vacuum cleaners are adapted to the requirements of professionals. Obviously, they comply with the current EU standards for handling the three dust classes. They offer greatest safety and comfort: During wet vacuuming the automatic shutoff protects from machine defects, and when cleaning the filters you can choose between manual and fully automatic function. Thanks to their compact design, the Metabo vacuum systems are extremely flexible and can be used wherever they are needed - on the construction site, in the workshop or to vacuum vehicles. Clever storage options for suction tubes and nozzles as well as handy support surface round off the ergonomic design. Using Metabo's vacuum systems you work is clean, you progress quickly and your health is protected.
Extraction systems for Metabo power tools
Metabo offers professionals efficient dust extraction solutions for different power tools: Matching our compact angle grinders, we have three extraction hoods for cutting tiles, screed or fine earthenware and for grinding adhesive, concrete or screed in our portfolio. There are also customised systems for our renovation grinders, rotary hammers and other power tools, guaranteeing an effective extraction. From the vacuum cleaner and hoses, adapter, suction tubes, nozzles and different filters, we offer you a complete extraction solution from a single source customised to your individual requirements.
Our chip and dust extraction units are used when it comes to processing wood: With a bag volume from 65 to 135 litres they reliably keep the working environment clean from chips and dust particles. Their operation is low-noise with a volume of only 75 db(A). Our SPA 2002 system, which was awarded the G3 seal of quality H3, is suited for commercial use. Obviously there are matching accessories for all chip and dust extraction units, such as auto switch-on devices, filter cartridges, hoses and adapters.
Light, quiet, powerful: Metabo's hedge trimmers
Metabo hedge trimmers have been setting standards in the market for decades. With patented handle systems, robust motors, high-quality blades and excellent ergonomics. They are always the right choice for professional users. Whether mains-powered or as a cordless machine with intelligent battery pack technology: Metabo hedge trimmers are amongst the lightest machines on the market and offer maximum safety thanks to their quick stop function, torque limiting clutch and trigger guard.
More comfortable and safer working with the Metabo hedge trimmers
Carbon brushes and cables can be easily replaced, which saves you time and money. The extra large trigger guard prevents kickbacks on you and your hedge trimmer, for example when hitting walls, trunks or stones. The electronic quick blade stop offers maximum safety to the user and the Metabo S-automatic safety clutch protects also blade and gear from blocking caused by foreign objects. Metabo has also optimised the air flow of the hedge trimmers, so that the exhaust air is blown out at the bottom and not into your eyes.
The Metabo cordless hedge trimmers: Put an end to annoying cables
Every janitor, landscaping gardener or cemetery gardener is familiar with the problem of unintentionally cut cables when trimming hedges or the inconvenience causes by endless pulling of cables. Until some years ago, the alternatives were petrol-powered hedge trimmers or real heavyweights.
With the cordless hedge trimmers AHS 18-55 and the AHS 36 V from Metabo you are independent and mobile and are free to choose - depending if you work with machines of the 36 or 18 volt platform. For particularly long cuts of up to 63 centimetres, Metabo offers the AHS 36-65 V with 36 volt. All three machines offer the same performance. Especially practical: As part of the extensive 18 battery pack range from Metabo, you can combine the cordless hedge trimmer AHS 18-55 with already available battery packs and chargers. With the AHS 36 V and a 36 volt battery pack with 1.5 Ampere hours, the garden professional can work for 50 minutes without interruption.
The AHS 18-55 V manages even 80 minutes per battery charge with a 18 volt battery pack with 5.2 Ampere hours. With the quick charger ASC Ultra, the 5.2 Ah battery pack is charged in only 45 minutes. This allows you to tackle even large hedge areas far away from any socket outlet.
Precise and compact: Laser measurement tools from Metabo
With the robust and precise laser measurement tools from Metabo, professionals can work reliably in interior development. Drywall constructors, carpenters or tile layers use the precise lines for orientation, set well visible plumbing points and measure distances down to the millimetre. All laser tools can be operated without additional aids, and thus you save costs and working time.
Orientation in the entire room thanks to our precise laser measurement tools
The MLL 3-20 multi-line laser unites the advantages of a point and cross-line laser. The high-quality tool projects a 360° horizontal line as well as two vertical lines at an angle of 90° in the room. Thanks to the integrated pendulum, the laser self-levels itself in a range from ± 4°. The supplied laser goggles improves the perception of the laser markings.
The KLL 2-20 cross line laser projects a horizontal and vertical line into the room, as well as a plumbing point on the floor and ceiling. At the touch of a button the laser beams also represent the contours of a drywall. The PL 5-30 point laser projects five laser points into the room - towards the front, the sides, the ceiling as well as the floor. Multi-line, cross line and point lasers each have a base that can be extended to the height of a drywall profile and simplifies the marking of floor positions. A strong rare earth magnet, a tripod connection and metal eyelets for belts permit flexible use of the three tools.
Permit precise angles and distance measurements - The Metabo laser measurement tools
With its two laser beams, the BLL 2-15 floor line laser projects a 90° angle on the floor and is thus the right helper for floor laying jobs. The integrated spirit level permits perfect alignment even on uneven surfaces: the dual purpose base permits the use at a tile edge. With its practical design the BLL 2-15 fits perfectly in any corner and helps to check the relative accuracy of both floors and walls and their associated angles. The two taser distance measurement tools LD 60 and LD 30 are useful companions thanks to their handy pocket format and the ISO-certified measurement quality. The LD 30 measures the length, the area and the volume and shows changes in distance by virtue of the continuous measurement function. As additional function, the LD 60 permits the calculation of small sections. Metabo offers matching system accessories for its laser measurement tools, for example telescopic supports, geared column tripods and compound slides for the fine adjustment of the tool position.